Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   AR-15 Discussion (http://www.firearmstalk.com/forums/f20/)
-   -   A question about extractor springs. (http://www.firearmstalk.com/forums/f20/question-about-extractor-springs-90997/)

GREGULON 05-21-2013 12:07 AM

A question about extractor springs.
 
I was cleaning the bolt and extractor the other day and the spring came loose and I put it back in but I am wondering if that is normal or should I worry about getting a new extractor spring?

purehavoc 05-21-2013 12:43 AM

Get a new roll pin , it should not come out without a hammer and punch

JonM 05-21-2013 02:46 AM

its normal for some to be looser than others. only real fix would be to replace the extractor and spring. the extraor retaining pin will keep it all together under pressure. if it doesnt then you need a new spring for sure.

GREGULON 05-21-2013 09:49 AM

Thanks 4 the info


All times are GMT. The time now is 12:41 AM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.