Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   AR-15 Discussion (http://www.firearmstalk.com/forums/f20/)
-   -   Parts kit (http://www.firearmstalk.com/forums/f20/parts-kit-14749/)

michael a 06-13-2009 02:37 AM

Parts kit
 
Could anyone suggest a company that carries a complete parts kit less the stripped lower reciever with a A-1 upper reciever and the 16 in barrel with the fixed 5.5 inch flash suppressor. I have checked the net but can only find that barrel with the A-3 flat top reciever.

markerdown 06-15-2009 09:56 PM

Did you check out Rock River Arms?

Going Postal 06-16-2009 01:54 AM

Quote:

Originally Posted by michael a (Post 116679)
Could anyone suggest a company that carries a complete parts kit less the stripped lower reciever with a A-1 upper reciever and the 16 in barrel with the fixed 5.5 inch flash suppressor. I have checked the net but can only find that barrel with the A-3 flat top reciever.

I was looking at a complete parts set this morning on Cheaper than dirt, I don't think it is exactly what you are looking for but here is the link:

ARR-167 - AR-15 CMMG Complete Parts Kit Less Lower Receiver WASP Coated Steel Parts

I thought is was terribly high priced, seeing that I can buy a complete Bushmaster at my local shop for $999.

Dillinger 06-16-2009 02:21 AM

Seriously brother - have you even looked around??

Parts kits are in short supply on hand, but everyone sells a parts kit, or a full upper, in the configuration you are talking about.

Rock River Arms
Olympic Arms
Bushmaster
Colt

Want high end for the sake of paying a ton of money for name?

Sabre Defence
D&L Sports
Baer Arms

Brownell's has parts kits for the lower and BCG for the Upper. I believe they even sell completed uppers....

Take a stroll through the AR-15 section of this forum - there are a TON of threads about what people bought, where they got it, why they went that route. There is probably more information already in those threads than you can digest in a week of reading....

JD

michael a 06-16-2009 05:45 AM

Thanks for the info guys and Jd I have checked those places and all i can find are the a-2 or a-3 flat top not the a-1 but thanks again for the info.

hunter Joe 06-17-2009 03:04 PM

Try ar15.com an click th J&T or the Del-Ton link.

ChuckD 06-17-2009 10:58 PM

Look up M&A parts. They do not do back orders so if you call and ask what they have instock, you can order right then and there and have your kit inside of a week.

Chuck D

michael a 06-19-2009 05:40 AM

Thanks joe and chuck will give them a try.


All times are GMT. The time now is 07:30 PM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.