Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   AR-15 Discussion (http://www.firearmstalk.com/forums/f20/)
-   -   Oracle kit and PSA lower 1st build (http://www.firearmstalk.com/forums/f20/oracle-kit-psa-lower-1st-build-68077/)

Tenderribbs 07-11-2012 10:29 PM

Oracle kit and PSA lower 1st build
 
I just ordered a oracle DPMS kit from stacks . I had to look a while to find this
Particular kit . I would say 90 percent of businesses were backordered, same thing with the del-ton kits. I got a PSA lower from jssports. Same issue with lower also. I have bought four other Ars in the past year, but this is my first build . I orders a reciever block, a punch kit and universal tool for barrel and a a vice . If you guys have any recomendations it would be appreciated.

jg3 07-12-2012 01:28 AM

First thing I would do is read the stickies at the top of the page.

I also really recommend the tool brownells sells for installing the pivot pin detent. I know some people have found home remedies for this. But after losing 2 detente in the depths of our carpet I won't go without it again.

Other than that be sure to have some loctite handy and a torque wrench too.

Tenderribbs 07-12-2012 05:29 PM

What size torq wrench ?

Tenderribbs 07-12-2012 05:31 PM

What type of fittings will I need for the torq wrench? Allen head , socket, or flat head? Thanks for the help . I would like
To have everything I need ahead of time

Quentin 07-12-2012 07:08 PM

You know it's impossible to have everything you need. There's always one last thing you don't have! :D

jg3 07-12-2012 09:09 PM

Quote:

Originally Posted by Tenderribbs
What type of fittings will I need for the torq wrench? Allen head , socket, or flat head? Thanks for the help . I would like
To have everything I need ahead of time

Not sure the maximum ft/lb you will need, I think 80 would be plenty...as for the fittings needed the universal armorers wrench will have a place for the head of the socket. But again a few you tube videos and the stickies here should give you plenty of guidance

Quentin 07-12-2012 11:32 PM

Torque or Torx?

Tenderribbs 07-13-2012 02:22 AM

Torque sorry


All times are GMT. The time now is 11:36 AM.

Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.