Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   AR-15 Discussion (http://www.firearmstalk.com/forums/f20/)
-   -   New AR (http://www.firearmstalk.com/forums/f20/new-ar-73439/)

kjamesp92 09-30-2012 03:14 PM

New AR
 
1 Attachment(s)
My new stag model 3 with the Eotech

Attachment 61480

Sniper03 10-02-2012 12:25 AM

92

Nice Piece!

03

jjfuller1 10-02-2012 12:47 AM

beautiful, im partialy to stags.. looks like it shold treat you nice. we are awaiting a range report asap!

kjamesp92 10-02-2012 01:36 AM

Shot great for the first 75 rounds then it stopped ejecting it would extract but not ejecting so I took it home and tore it down to find the ejector pin stuck in the down position it took about 2 hours of soaking in wd-40 befor it popped out I lubed everything and worked it for a while and I seems to be fine now but we will see when I go back out Thursday

jjfuller1 10-02-2012 12:59 PM

Quote:

Originally Posted by kjamesp92 (Post 960963)
Shot great for the first 75 rounds then it stopped ejecting it would extract but not ejecting so I took it home and tore it down to find the ejector pin stuck in the down position it took about 2 hours of soaking in wd-40 befor it popped out I lubed everything and worked it for a while and I seems to be fine now but we will see when I go back out Thursday

dont be afraid to contact stag if problems continue. they have lifetime warrenty and pretty decent customer service.

kjamesp92 10-02-2012 03:08 PM

Yeah I will but think it could have just been the rifle breaking in the pin felt real sticky but now it's a lot smoother

drvsafe 10-02-2012 03:13 PM

Sounds like you ran it dry, or it was used well and not cleaned properly? But I may be wrong. Either way, if its a manufacturer's defect Stag's CS is great!

kjamesp92 10-02-2012 03:34 PM

Well the gun was brand new so it wasn't dirty but I did break it down and oil it befor going out I hat think the oil may not have worked down into the ejector pin hole as well as it should have


All times are GMT. The time now is 12:41 PM.

Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.