Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   AR-15 Discussion (http://www.firearmstalk.com/forums/f20/)
-   -   Midwest Industries AR-15 Handguards (http://www.firearmstalk.com/forums/f20/midwest-industries-ar-15-handguards-56128/)

billt 01-23-2012 01:50 PM

Midwest Industries AR-15 Handguards
 
http://i812.photobucket.com/albums/z...dguards005.jpg

http://i812.photobucket.com/albums/z...dguards002.jpg

http://i812.photobucket.com/albums/z...dguards004.jpg

http://i812.photobucket.com/albums/z...dguards006.jpg

http://i812.photobucket.com/albums/z...dguards001.jpg

http://i812.photobucket.com/albums/z...dguards007.jpg

Here are a couple of my plain Jane Bushmasters I dolled up a bit with some new handguards from Midwest Industries, and a Vltor E-Mod Stock. The M-4 is a A-1 Model, and the rifle is a 20" A-2. Both have the non removable carry handle. The Midwest Industries Handguards are really nice. Being a machinist, I don't see how they can make them for the price they charge. When I opened the box I was greeted with flawless machining, and an all but perfect fit. While you don't really need it, I purchased the Tapco AR-15 Handguard Removal Tool. For $15.00 it was well worth it. It gives you plenty of leverage, and makes changing out the handguards a much easier job. The Tapco wrench is heavily rubber coated, and you will not mar the finish on your gun.

These handguards were perfectly machined, and while it was a very close fit, they went right on and were nice and tight and exhibited no movement after they were installed. They really are a nice improvement over the plastic factory handguards. As you can see, they also allow for much better cooling of the barrel and gas tube as well.

I really like the Vltor E-Mod Stock also. It adds a little extra weight to the weapon which helps it balance better, and it also give you almost a full inch added to the overall length of pull when compared to the factory stock supplied with the weapon. I have long arms so that really helped with stock fit and cheek weld. The picture below shows both guns before I installed the upgraded stock and handguards. (The A-2 is in the middle, and the M-4 is to the right of it). A really nice inexpensive improvement that was well worth it.

http://i812.photobucket.com/albums/z...sterAR-15s.jpg

For anyone looking for AR-15 stocks and forends, check out Man Venture Outpost ManVenture Outpost - The Great Outdoors for Less! They have really good prices, along with good service, and very fast shipping. I ordered the items on Thursday afternoon, and they were delivered Saturday morning Fed Ex Ground. That is from Arlington, Texas to Phoenix, Arizona. They sent an E-Mail confirming shipping within a couple hours. Good people to deal with. They have a really good selection as well.

Quentin 01-23-2012 05:17 PM

Looks good, Bill, and nice armory you've got there too!

And good to see you posting here again, maybe we can have a few more arguments! :D

MrWray 01-23-2012 06:57 PM

Nice armory there, i use a Midwest Industries quad rail on mine and im really happy with it

lunarmanathome 01-23-2012 09:56 PM

bill,

I run a VLTOR on one of my AR15 5.56 builds - I hate it. I was also issued these in Iraq along with the CASV handguard system - hated it then too (weight manily, secondarily was noise). It rattled side to side and front to back. I ended up putting some friction tape (which eventually fell off) and tried velcro buttons too. The rattle when it's locked just doesn't make me happy. Why did I buy one anyway? I don't know, it s a mystery, maybe I was out of my mind when I dropped that order? ;)

I do have an F93 that I prefer now.

How do you like your SBR? Oh, and thanks for the gun porn!


All times are GMT. The time now is 08:06 PM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.