Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   AR-15 Discussion (http://www.firearmstalk.com/forums/f20/)
-   -   just a quick question? (http://www.firearmstalk.com/forums/f20/just-quick-question-64743/)

hockeyjr1 05-18-2012 08:02 PM

just a quick question?
 
im getting a daniel defnce upper reciver for my ar15. and i am parting ways with my rock river upper reciver to my cousin who will build a rifle from it. no my question is tht the DD upper comes with this BCG....


•Bolt Carrier Group: F/A BCG, HP and MPI Tested, Shot Peened Bolt, Extractor Booster, Properly Staked Gas Key

and my RRA has a Chrome BCG that i love since it needs almost no oil on it and you can easily see how dirty it is when your cleaning it.

so should i keep the RRA chrome BCG and put that into the DD upper or just keep the same upper and BCG together that comes in the DD?

frostyone 05-18-2012 08:17 PM

I would keep the bolts together. Once a BCG is fired for a while you should try to keep it with the upper it was used in. They wear in together.

JonM 05-18-2012 08:40 PM

the rra chrome bcg is nice but your new dd one is better quality. parts dont need to be squeeky clean unless your shooting corrosive ammo. i just knock the chunks off oil it up and call it good.

when the carbon builds up to really noticable levels i give it a few light wacks with a catm4 tool but dont overdo it.

the military teaches its gotta be super clean but it really doesnt. just keep it from getting out of control. i only spend 10-15 minutes tops cleaning any gun.

hockeyjr1 05-18-2012 08:59 PM

yeah i figured the new on would be better quality comming from DD. I dont care about beaing able to see the dirt asim wiping it off. rather have a gun run how it was made to then start having problems. thanks for the help guys. oh and is there anything i need to keep in mind with a chrome linned barrel? mine now isnt just making sure theres no difference in like cleaning and stuff...

JonM 05-18-2012 09:03 PM

Quote:

Originally Posted by hockeyjr1 (Post 806885)
yeah i figured the new on would be better quality comming from DD. I dont care about beaing able to see the dirt asim wiping it off. rather have a gun run how it was made to then start having problems. thanks for the help guys. oh and is there anything i need to keep in mind with a chrome linned barrel? mine now isnt just making sure theres no difference in like cleaning and stuff...

easier to clean.

AgentTikki 05-18-2012 11:20 PM

If you want it easier to clean, you can always send out your DD bolt and carrier to get it coated. I personally wouldn't do it but they offer the service.

Sniper03 05-18-2012 11:24 PM

When you start switching Bolt Carrier Groups they should have the Head Space checked!

03


All times are GMT. The time now is 10:04 AM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.