Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   AR-15 Discussion (http://www.firearmstalk.com/forums/f20/)
-   -   Hatchet job on an AR (http://www.firearmstalk.com/forums/f20/hatchet-job-ar-10623/)

bobbyb13 02-05-2009 08:58 PM

Hatchet job on an AR
 
No. 1 Son has arrived for 5 days, (with the Grankids, YES) He brought me a AR that he bought for a song from a Sailor going to sea. He told me before I got to excited to look at the chamber. and feed ramps. Looks like someone tried to make A4 feed ramps with a hatchet. I have spent about 3 hours with a needle file and stone to get them half way cleaned up. I Flushed the chamber and everything out with brake cleaner. Found a lot of trash in it. It came with 2 Sig-Sauer 30 round mags, (tupperware) and would not feed from either. Works good with the three green follower clips I have. Why, some people think they are gunsmiths is a mystery to me. The only reason I fooled with it was I figured I could do no more damage. Excuse me, I got some serious spoiling to attend to.

outlawcustoms 12-19-2009 04:51 AM

If you cant fix the sailor job just buy a new barrel and run the gun. If he did not play with anything else

spittinfire 12-19-2009 11:05 AM

Sounds like a fun little project. Enjoy the grandkids!!

slowryde45 12-19-2009 05:27 PM

Time to break out the DREMEL tool :p

Worst case scenario, if you still can't clean it up, would be a new barrel, possibly new upper receiver if he cut into that, too.

Slo


All times are GMT. The time now is 12:06 PM.

Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.