Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   AR-15 Discussion (http://www.firearmstalk.com/forums/f20/)
-   -   First AR15 build... Help with parts list!? (http://www.firearmstalk.com/forums/f20/first-ar15-build-help-parts-list-78671/)

diesel223 12-17-2012 04:14 PM

First AR15 build... Help with parts list!?
 
Okay so I am starting my first AR build and am looking for help making a parts list. ?
Are different companies compatible with others? ( like can I mate a RRA stripped lower with a bravo company upper and Daniel deference hand guard?) for example
Can anyone give me some help on building an upper receiver? Parts list?
I know that I want a 14.5 in barrel and adjustable stock. But those smaller goodies will come later.
Thanks for the help !

Sniper03 12-17-2012 11:43 PM

Diesel,

You are aware that by going to a 14.5" Barrel it becomes a Short Barrel Rifle according to ATF rule and requires registration and a $200 Federal Tax Stamp. Once an SBR always an SBR. The exception is for example if you would have the 14.5" Barrel with a Vortex Flash Hider permanently affixed to the barrel. (Pinned & Brazed).
My suggestion unless you have the proper tools like a torque wrench, barrel nut tool, receiver block, head space gauges and etc. I would just buy a complete upper with the bolt carrier group already in it. This will also assure everything is correct.

03

LaiePoi 12-18-2012 07:25 AM

Quote:

Originally Posted by Sniper03
Diesel,

You are aware that by going to a 14.5" Barrel it becomes a Short Barrel Rifle according to ATF rule and requires registration and a $200 Federal Tax Stamp. Once an SBR always an SBR. The exception is for example if you would have the 14.5" Barrel with a Vortex Flash Hider permanently affixed to the barrel. (Pinned & Brazed).
My suggestion unless you have the proper tools like a torque wrench, barrel nut tool, receiver block, head space gauges and etc. I would just buy a complete upper with the bolt carrier group already in it. This will also assure everything is correct.

03

Well said! That's exactly what I ended up doing. Originally, I planned on building the upper because I thought it would be cheaper but found out if you don't have all the tools for the job then it will actually end up costing more after factoring in the cost of the tools + parts (at least it did in my case). Luckily I was able to find a complete upper with all the parts I had on my list except for the bcm bcg. but a noveske bcg should do just fine. I'm happy I bought the upper complete because you don't wanna do a poor job at assembling the upper and mess up the headspacing, accuracy, etc. just build the lower its a lot easier unless you really know what ur doing and already have all the tools. Good luck!

diesel223 12-18-2012 12:42 PM

Thanks guys I have been doing some research and decided to listen to you guys and buy a complete upper already assemble to avoid error. Now if I get a standard 16" upper will I have to get that federal stamp? Any suggestions for uppers?

Quentin 12-18-2012 04:59 PM

Quote:

Originally Posted by diesel223 (Post 1056152)
Thanks guys I have been doing some research and decided to listen to you guys and buy a complete upper already assemble to avoid error. Now if I get a standard 16" upper will I have to get that federal stamp? Any suggestions for uppers?

No, not with 16". Check your local regs though. Read through recent threads for upper selection. And have you read the AR primer sticky?

purehavoc 12-18-2012 05:07 PM

You can still get a 14.5" barrel but you will need the flash hider pinned and welded to get you to the 16" legal length , this will not require a stamp either .


All times are GMT. The time now is 02:47 AM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.