Firearm & Gun Forum -

Firearm & Gun Forum - (
-   AR-15 Discussion (
-   -   Finished spr (

kjamesp92 01-13-2013 06:37 AM

Finished spr
1 Attachment(s)
She is finally done other then needing new glass and mount.
Sun devil lower
Geissele trigger
Colt mp elite 24'' upper
Magpul prs

Attachment 79423

AgentTikki 01-13-2013 10:30 AM

Nice stick man!

What kind of trigger and glass you got there?

Khromo 01-13-2013 01:40 PM

Nice looking gun!

I've got a Colt CR6724CA that has the same or a very similiar upper. Mine has a 1-9" twist. I added a PRS stock and a 3 pound Timney trigger, so it is very similiar to yours, down to the hand guard and gas block!

The round count just broke 200, so I haven't gotten into any serious load development yet. I did spend a few hours last week shooting some five shot groups at 100 yards, using a Nikon Monarch 5-20, a Caldwell front rest, and a rabbit ear bag in the rear. My eyesight is not that good. My skills, well, I don't know if it is accurate to call them "skills".

Fifteen 60 grain Sierra Varminter Hollow Points yielded groups measuring 0.90”, 0.90”, and 0.80” for an average of 0.87”. Groups had vertical stringing.

Ten 63 grain Sierra Varminter semi-points yielded groups measuring 0.75” and 0.60” for an average of 0.68”. Groups had slight vertical stringing.

Fifteen 69 grain Sierra MatchKing HPBT’s yielded three groups measuring 1.45”, 1.00”, and 1.20” for an average of 1.22”. Groups had slight vertical stringing.

I need to do a lot more work with this gun, the loads, and with my AR technique, but I'm beginning to suspect that my barrel doesn't like the 69 grain bullets. I would be interested in hearing how your rifle reacts to different bullet weights.

dalefan88 01-13-2013 01:41 PM

That is some nice work there.

kjamesp92 01-13-2013 03:46 PM

I'll be sure to let you know how the accuracy progresses with this gun I'm not expecting much now being that the mount and scope were pretty much something I just threw on to see how it would look with glass mounted but until I save up for a luepold I'll just leave the cheap Walmart glass

SSGN_Doc 01-13-2013 03:58 PM

Looks nice. More like a SDMR than SPR. Either one is a good concept gun though.

Should still get some good groups out of it even if you don't have your permanent optics on it. My SDMR inspired build did fine with a Tasco Varmint scope for a while.

Mine has a 1:8 twist barrel and likes 68gr Sierra Match King hand loads as well as the same bullet as loaded by Black Hills. Shoots the 77gr Match king load well to, but those 68 grainers seem to be the sweet spot for mine.

All times are GMT. The time now is 09:18 AM.

Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.