Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   AR-15 Discussion (http://www.firearmstalk.com/forums/f20/)
-   -   COLT HBAR for a newbie (http://www.firearmstalk.com/forums/f20/colt-hbar-newbie-5837/)

ah141nj 07-25-2008 04:39 PM

COLT HBAR for a newbie
 
Hello All,
New to the forum. New to rifles (a handgun guy). New to AR's Need some advice. Always wanted an AR. Didnt realize I can have one being in the Republic of NJ.
Not a hunter, just for target & eventually competition.
Visited a local gun store. He just got in a Colt Competion Target HBAR with a 16'' barrel & a detachable handle with adjustable sights, no flash & no telescopic stock. NJ Legal. Said he thinks its about 5-6 years old. The rifle looked very well maintained & clean all around. He said he would take $850 for it.
Now mind you I am totally new to AR's.
Is this a reasonable price for it?
Should I just get a new Busmaster, Stag or RRA?
Is a 16'' legal in any competition? It must be if its in a Competition Rifle..no?
Am I limited to COLT only accesories. Heard a lot of Colt rifles are very particular about mating to other parts.
Thanks for any input you can give to this newbie

Dillinger 07-25-2008 05:02 PM

Boy - That is a can of worms you just opened. Get ready for information overload... LOL

The Colt stuff does have mating problems. They have different specs than a lot of the manufacturers, so if you don't like what's on the weapon, you are going to pay for the right aftermarket pieces to make them fit.

That said, a lot of the Colt stuff I have seen is good quality gear that seems to run just fine. I have never owned one, but I have seen a few come through the shop and no one that ever handed me one said it was a POS.

I did some checking and I can't find exactly what you are describing, but I did find a similar model that might be what you are talking about:

MODELMT6731
NAMEMatch Target Competition HBAR II
FINISHMatte black
ACTION
- Semi Auto
- Gas operated
- Multi-lug rotary locking bolt
CALIBER.223 Rem
CAPACITY9 Rounds
BARREL LENGTH16”
RIFLING TWISTRH. 1 Turn in 9”
RIFLING GROOVES6
TRIGGERSmooth
FRONT SIGHTAdjustable post for elevation
REAR SIGHTAdjustable for windage and elevation
SIGHT RADIUS14”
WEIGHT7.1 lbs
OVERALL LENGTH34”
SPECIAL FEATURES- Flat top receiver allows for scope mounting

This is a spec off the Colt home page for a model that has the 16" barrel and the fixed stock, with the flat top you are describing.

The chamber is cut for .223 only - which means you can't really shoot the 5.56 NATO stuff without doing some damage. The 1 in 9 twist barrel is for a bit heavier rounds. A lot of stock ammo for the AR category is .55gr but this is more along the lines of, I think, a .62 grain type of bullet.

There are some master reloaders here that can verify that for you, reloading is not my specialty by any means. :o

They seem to be retailing for around $1100 around the 'net with a casual glance. I would be a little leary at shelling out $850 for a rifle that is 5 to 6 years old without doing a bore scope and a close inspection. I mean, you are only $200 to $250 off of a brand new model if you REALLY want the Colt.

That said, there are much better deals out there on AR's that will perform as well, if not better, that won't have the aftermarket concerns of the Colt. They are a fine weapon, don't get me wrong, but you are paying for a name - and as long as you are okay with that, then more power to you.

There is a thread in the Knowledge Base that will show you how to build your own AR lower receiver with parts that you can purchase piece meal from places like Midwayusa and Brownell's, along with a bevy of specialized dealers, if you are interested. It is for registered members, so you would have to sign up to help support the site, but the option is there if you wish.

Best of luck -

JD

canebrake 01-27-2009 04:19 AM

WELCOME ah141nj to the forum.

Sorry I'm no help with the evil black rifles, I'm partial to the eastern urope-a-pee-n brown ones. There are plenty of guys here to help you.

I can tell you that I'm a big Colt handgun fan/owner and have found them to be true to the Master's http://i414.photobucket.com/albums/p...k45ACP/jmb.jpg 1911 design.

You won't go wrong going
http://i414.photobucket.com/albums/p...brbuckle_0.gif


All times are GMT. The time now is 07:53 AM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.