Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   AR-15 Discussion (http://www.firearmstalk.com/forums/f20/)
-   -   Building an AR-15 (http://www.firearmstalk.com/forums/f20/building-ar-15-a-1595/)

Starduck 08-08-2007 03:27 PM

Building an AR-15
 
I am about to be building my own AR-15, I think I can get all the parts necessary by order; but I was wondering what kind of wrenches do you need for this?

ranger_sxt 08-08-2007 06:31 PM

http://www.firearmstalk.com/forums/f20/ar-tools-952/

my21SF 08-08-2007 11:02 PM

build or put together?
 
are you wanting to build one or assemble one? to assemble one you dont need any certain tools,you can buy the upper,lower, and bolt already assembled and then just put them all together.when knocking the pins out be sure to use something that wont scratch the metal though! good luck!

outlawcustoms 12-19-2009 05:03 AM

Brownells and bravo company have tools

lonyaeger 12-19-2009 03:15 PM

Check out Dillinger's thread about building an AR in the Knowledge Base. Tells you just about everything you need to know. I'm building one, too, and I'm using his procedure.

cpttango30 12-19-2009 03:44 PM

Quote:

Originally Posted by outlawcustoms (Post 201556)
Brownells and bravo company have tools

Nice drag up old threads just so you can sell stuff. How about making a real contribution to the board.

These are the sellers that I would never buy from. They run all over the interwebs posting nothing but dribble then start selling crap.

No thanks.

outlawcustoms 12-19-2009 04:40 PM

I dont work for them I am a U.S. Marine i was just trying to let him know they have tools there and i have never had a problem with them. If i was trying to drum up sells i would have told him I custom turn barrel and build uppers as a side job But i didn't. I like when people try something new like building there own rifle. Good Job though buddy you rock.

Semper Fi
Derek

FCross7 12-19-2009 07:43 PM

Quote:

Originally Posted by outlawcustoms (Post 201684)
I dont work for them I am a U.S. Marine i was just trying to let him know they have tools there and i have never had a problem with them. If i was trying to drum up sells i would have told him I custom turn barrel and build uppers as a side job But i didn't. I like when people try something new like building there own rifle. Good Job though buddy you rock.

Semper Fi
Derek

He wasn't talking about what you posted here. He was referring to the fact that you went through posting on everything, and not really adding any useful info, so that you could post your stuff in the sales area.

And you did make posts about your barrels and uppers, just not in this thread.

-Fred


All times are GMT. The time now is 11:43 AM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.