Originally Posted by Sgt_Skrb_25
That's cool on the hook up you got. Hope you you heal up soon and get behind rifle. Just curious what twist rate you went with and your range you can hit with it.
This is what I went with.
All Daniel Defense Cold Hammer Forged AR-15 Barrels are constructed of Mil-Spec 4150 Chrome Moly Vanadium steel that is hydraulically shaped by carbide steel hammers around a precision machined mandrel to form the chamber, lands, and grooves. The hammer forging process creates a defect-free bore with the most consistent chamber possible, and each of Daniel Defense's barrels undergoes a Magnetic Particle Inspection (MPI) test to insure this standard of perfection is achieved. Barrels feature a chrome lined chamber and bore, providing easy clean-up, reduced wear and corrosion resistance. The barrel extension incorporates M4 feed ramps for increased reliability. Chambered in 5.56x45mm NATO for full compatibility with both commercial and surplus mil-spec ammunition. Comes with pre-installed barrel extension and locator pin.
Material: 4150 Chrome Moly Vanadium, Cold Hammer Forged
Chamber: 5.56x45mm NATO
Twist Rate: 1 in 7"
Chrome Lined: Yes
Finish: Mil-Spec Heavy Phosphate
M4 Feed Ramps: Yes
Muzzle Thread Pattern: 1/2"-28
Gas Port Location: Mid
Exterior Diameter at Gas Port: 0.750"