Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   AR-15 Discussion (http://www.firearmstalk.com/forums/f20/)
-   -   ar feeding problems (http://www.firearmstalk.com/forums/f20/ar-feeding-problems-45662/)

Korey 07-23-2011 03:52 AM

ar feeding problems
 
so I got about 70-80 rounds of these
2-H8025 - Ammo .223 Remington Hornady Superformance V-Max 53 Grain 3465 fps 20 Round Box
for free from a buddy of mine, but every time I go to cycle them through the weapon the bolt locks forward tight and will not come back with out a strenuous pull on the charging handle. I polished the feed ramp inside the receiver and that made it so instead of jamming every shot it works fine until the oil that I literally soaked the ramps with wears down then starts to jam again. 1:10 jams up now, it's really starting to get irritating. I tried steel cased, fmj's, hollow points, pretty much every thing else cycles fine. I haven't shot any yet, I have just been manually cycling them in 3 different mags I've been little worried to shoot with a bolt sticking forward. Any ideas?

TheDaggle 07-23-2011 04:09 AM

Don't use those bullets. ;)

Sniper03 07-23-2011 04:09 AM

korey,

The magic question! Are they reloads?

03

Korey 07-23-2011 04:11 AM

no reloads, factory right out of the box, buddy sold his ar and gave them to me. I'm not about to just ''not use them'' I don't want a gun that won't eat every thing it's fed. If there is something I can do to solve the problem I'll try to solve it.

Korey 07-23-2011 05:13 AM

alright I got paranoid and went out and shot
5 fmj's- worked fine
5 hornady vmax - worked fine

now I'm really confused, I guess I'll have to go run like 30 through of each or something


All times are GMT. The time now is 06:40 PM.

Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.