Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   AK & SKS Discussion (http://www.firearmstalk.com/forums/f19/)
-   -   Trying to decide between a Zastava O-PAP or Maadi AK-47 (http://www.firearmstalk.com/forums/f19/trying-decide-between-zastava-o-pap-maadi-ak-47-a-94956/)

180baseball 08-04-2013 03:35 PM

Trying to decide between a Zastava O-PAP or Maadi AK-47
 
I have been looking to buy an AK-47 for some time now to add to my "armory". I have narrowed it down to either the Century Arms O-PAP M70 or the Egyptian Maadi AKM-47. I am leaning towards the Maadi because it can except standard replacement barrels and standard furniture, where as the O-PAP requires an adapter for TAPCO stocks

msup752 08-04-2013 04:50 PM

I have a Maadi imported by Century Arms. It does not like HP ammo. It also did not accept the Tapco folding stock as the back plate is welded in place so no stock can be inserted. This may be due to the thumb hole stock requirements at the time. I managed to knock the plate out fairly easily and rigged up the stock from there.

My Maadi is relatively heavy and I can't hit much with it using the iron sights so she is a safe queen.

flybuddy 08-05-2013 10:35 AM

I recently purchased a CA M70 OPAP. CA mills out the magwells to take standard double stack AK mags--no adapter needed.
ALSO, the are still on sale at J&G Sales for $599--heck of a bargain.
http://www.jgsales.com/cai-yugo-akm-47-o-pap-opap-m70-rifle,-7.62x39-cal,-with-pistol-grip-and-wood-stock.-**-sale-**-p-60085.html

Mark_Van_Goth 08-13-2013 09:28 AM

Do not buy egyptian stuff!!!
 
Quote:

Originally Posted by 180baseball (Post 1325803)
I have been looking to buy an AK-47 for some time now to add to my "armory". I have narrowed it down to either the Century Arms O-PAP M70 or the Egyptian Maadi AKM-47. I am leaning towards the Maadi because it can except standard replacement barrels and standard furniture, where as the O-PAP requires an adapter for TAPCO stocks

EGYPTIAN stuff is often poorely made...you're going to have problems.
The M70 is one of the best ak variant ever made.

mt6green 09-21-2013 05:53 AM

Wrong! Egyptian MAADI is one of the best and closest Russian AKM clones you can get. They are even made on the original Russian machines and tooling. The Maadi company AK's are far superior to the Romanian ones such as the WASR. If you don't want to hand out a small fortune for an American made Arsenal AK then Chinese Norinco, Maadi, or Bulgarian is the best you van get aside from a Russian one.

dyslexic_llama 09-22-2013 01:57 AM

The Zastava AK's are one of the best values right now.

I would go with the Yugoslavian family of rifles over most other AK variants, just something about them that screams quality all over.

JonM 09-22-2013 03:37 AM

meh my pref is the romanian wasr 10/63.

long as you handpick pay careful attention if the front sight base is canted or not they are great ak's.

just my opinion

Mark_Van_Goth 09-22-2013 01:53 PM

Quote:

Originally Posted by dyslexic_llama (Post 1379511)
The Zastava AK's are one of the best values right now.

I would go with the Yugoslavian family of rifles over most other AK variants, just something about them that screams quality all over.

;) I totally agree

ccase39 09-22-2013 09:48 PM

Quote:

Originally Posted by JonM (Post 1379600)
meh my pref is the romanian wasr 10/63.

long as you handpick pay careful attention if the front sight base is canted or not they are great ak's.

just my opinion

So do i want slanted or not?

dyslexic_llama 09-22-2013 09:59 PM

Quote:

Originally Posted by ccase39 (Post 1380287)
So do i want slanted or not?

No, everything should be fairly straight when you inspect an AK.

If the front sight is canted too far you wont be able to zero it, or if the gas block is canted it can cause premature wear on the piston and block.

Most AK's will have a slight cant in the front sight or gas block, that is just the nature of them.

Slight canting is okay and wont hurt the rifle, anything where it can cause zeroing problems or unnecessary amounts of friction is bad.

One of the easiest ways to tell (if you can't visibly determine) is to hook a standard communist cleaning rod into the front sight via the little hole and lay it with the threaded end in the rear sight notch then inspect and see if the rod is at an angle or not.

I have a WASR10/63 underfolder that came with a canted gas block that made it rough to work the action, I had to pop the pins out and redrill then move the block until it was straight.


All times are GMT. The time now is 09:13 AM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.