Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   AK & SKS Discussion (http://www.firearmstalk.com/forums/f19/)
-   -   Tapco Stock Worthiness (http://www.firearmstalk.com/forums/f19/tapco-stock-worthiness-73624/)

Werminator 10-03-2012 04:33 AM

Tapco Stock Worthiness
 
I am sure it has been discussed before but can anyone truly give me information about the Tapco T-6 stock system for the sks platform? I have a Norinco I love and debate whether or not to tac it out but I want to know a few things about the stock that seems most common on these rifles. Does the Tapco system lighten the rifle at all? Also, in its most compact form how does it stack up to the overall length of the stock rifle? That may seem like a relative answer since different types of sks are different lengths but is there someone who has done the side by side weight and size of a wooden stock vs. Tapco stock? Am I going to kick myself for it if I go to all the trouble of modernizing this great rifle?

Werminator 10-10-2012 01:56 AM

No one has the first hand knowledge? Am I throwing money out the window?

SSGN_Doc 10-10-2012 02:56 PM

I personally think an SKS is at its best in its stock form. The collapsible stocks don't offer much in weight or size savings. About the only things that you gain are a pistol grip and adjustability for different length of pull for different sized shooters or for cold weather clothes versus hot weather clothes. On the collapsed position I think you are right back at standard length if pull or may bet an inch or so shorter.

Overkill0084 10-10-2012 03:15 PM

I can't speak for the other versions (Yugo, Russki, etc.) of the SKS. I own a Chinese variant and the length of pull is just comical in OEM form if you are over 5'4". I'm 6'3" and the Tapco stock was just the ticket.
They are pretty well made and they look pretty good once it's all together. Fair warning, the gas tube cover is a bit of a pain to fit. I had to drill out the pin, drifting it wasn't happening. Also plan on taking your time and filing it to fit. Worth noting, I'm sure someone with more skill than me can get the wooden gas tube cover off in serviceable condition. I tried and failed. If keeping it (the old stock) on hand matters, you might wish to have the gas tube cover portion done by someone with actual skills.
Weight? You will save some, not so much as to be a big deal.
Length? As far as actual use, the adjustable stock is a godsend. Compressed, the Tapco is noticeably shorter. How much? Don't really know.
One thing I noticed is that for some reason, the recoil seemed more unpleasant. I suspect that the less rounded design of the Tapco buttplate is the culprit. It's not a big deal, but it could be a problem for someone that is extremely recoil sensitive.
IMHO, it was a big improvement. I wish I'd done it sooner. YMMV.

KHickam 10-18-2012 11:00 AM

Will the TAPCO - Intrafuse stocks fit on a WASR 10/63 - not crazy about the wood on the one I have on layaway - want something in Dark Earth

What you think?

SSGN_Doc 10-18-2012 11:57 AM

Quote:

Originally Posted by KHickam (Post 981158)
Will the TAPCO - Intrafuse stocks fit on a WASR 10/63 - not crazy about the wood on the one I have on layaway - want something in Dark Earth

What you think?

They should fit fine. They are made to fit any standard AKM patterned rifle.

fortinsj 10-27-2012 04:43 AM

I have a tapco stock on my Tula sks and I have to say I really like it. I like to hold the rifle with the pistol grip in my right hand and with my left hand right on top of the factory ten round mag. It feels so comfortable that way. I honestly don't feel much of a difference in weight but I do like the advantage of the adjustable stock. The only con is the pistol grip is plastic and is only held to the stock by a long plastic screw. The screw just screws right into the plastic. Be careful not to tighten it too tight and strip it. I made that mistake but tapco was great with their warranty and sent me a brand new stock without having to send back the old one. I'm currently looking to set a nut it the stock so the screw has something to bolt into for a sturdier fit. If SHTF you're better off with wood. But for the range it's great. My only regret is I didn't get the one in OD green!

fortinsj 10-27-2012 04:50 AM

Oh and one more thing...I really like how comfortable it is to work the safety with the pistol grip compared to the wood stock. You can just ride your finger on the safety instead of on the trigger guard, and just flip the safety off smoothly as you put your finger on the trigger and ready the weapon to fire.

JTJ 10-27-2012 04:52 AM

Quote:

Originally Posted by fortinsj (Post 991444)
I have a tapco stock on my Tula sks and I have to say I really like it. I like to hold the rifle with the pistol grip in my right hand and with my left hand right on top of the factory ten round mag. It feels so comfortable that way. I honestly don't feel much of a difference in weight but I do like the advantage of the adjustable stock. The only con is the pistol grip is plastic and is only held to the stock by a long plastic screw. The screw just screws right into the plastic. Be careful not to tighten it too tight and strip it. I made that mistake but tapco was great with their warranty and sent me a brand new stock without having to send back the old one. I'm currently looking to set a nut it the stock so the screw has something to bolt into for a sturdier fit. If SHTF you're better off with wood. But for the range it's great. My only regret is I didn't get the one in OD green!

Look at getting a "barrel nut" if you can. It is about 4 times long than a standard nut. It is not for the rifle barrel. If necessary you could drill and cross pin the barrel nut and still have plenty of thread.


All times are GMT. The time now is 08:45 PM.

Copyright ©2000 - 2016, Jelsoft Enterprises Ltd.