Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   AK & SKS Discussion (http://www.firearmstalk.com/forums/f19/)
-   -   tapco intrafuse sks stock opinions? (http://www.firearmstalk.com/forums/f19/tapco-intrafuse-sks-stock-opinions-61559/)

sksmerc 04-01-2012 02:36 AM

tapco intrafuse sks stock opinions?
 
Been thinking about updating my sks with a tapco stock. Anyone have one and how do the tapco detachable mags feed/fit with the stock. As always thank you for your input.

UrbanNinja 04-01-2012 02:42 AM

Quote:

Originally Posted by sksmerc
Been thinking about updating my sks with a tapco stock. Anyone have one and how do the tapco detachable mags feed/fit with the stock. As always thank you for your input.

I don't have the stock but, I do have a 10rd and 20rd tapco mags for my SKS's. Never had any issues with either one. Although I do hear people having lots of problems with the tapco mags not feeding correctly. I use mine with a Nylon Monte Carlo stock and factory wood stock. Ive been considering the intrafuse telescopic (non folding) stock for quite some time.

sksmerc 04-01-2012 06:17 AM

Quote:

Originally Posted by UrbanNinja (Post 758055)
I don't have the stock but, I do have a 10rd and 20rd tapco mags for my SKS's. Never had any issues with either one. Although I do hear people having lots of problems with the tapco mags not feeding correctly. I use mine with a Nylon Monte Carlo stock and factory wood stock. Ive been considering the intrafuse telescopic (non folding) stock for quite some time.

Ya I have heard a few people say they have had feeding issues. Awesome to hear that you haven't had issues with the feed. I have been looking at the tapco with the adjustable position stock. Also looking at a few different receiver covers with rails on them. Do you have optics?

UrbanNinja 04-01-2012 06:32 AM

Quote:

Originally Posted by sksmerc

Ya I have heard a few people say they have had feeding issues. Awesome to hear that you haven't had issues with the feed. I have been looking at the tapco with the adjustable position stock. Also looking at a few different receiver covers with rails on them. Do you have optics?

I mounted a rail to the dust cover and slapped a cheap Tasco red dot on. I don't do any long distance shooting, just some plinking at the range. The red dot was sufficient enough for that.

sksmerc 04-01-2012 06:54 AM

Quote:

Originally Posted by UrbanNinja (Post 758254)
I mounted a rail to the dust cover and slapped a cheap Tasco red dot on. I don't do any long distance shooting, just some plinking at the range. The red dot was sufficient enough for that.

do you get any rattle in it? I got a nice scope just waiting to figure out what mount to get.

UrbanNinja 04-01-2012 07:00 AM

Quote:

Originally Posted by sksmerc

do you get any rattle in it? I got a nice scope just waiting to figure out what mount to get.

It has only been mounted for about 200rds so far. No issues as of yet. It leaves 4" groups at 35 yards. The rail is riveted to the cover,and the clamps of the tapco are pretty secure, it hasn't seemed to have moved at all. Here is the model I use. http://www.amazon.com/gp/aw/d/B000GF1HKQ

UrbanNinja 04-01-2012 07:07 AM

This is the nylon "sporting" stock I use it with.
http://i1191.photobucket.com/albums/...218_223850.jpg

sksmerc 04-01-2012 09:32 AM

Quote:

Originally Posted by UrbanNinja (Post 758272)
This is the nylon "sporting" stock I use it with.
http://i1191.photobucket.com/albums/...218_223850.jpg

haven't seen that stock yet I like the look of it how much was it.

Josh1158 04-01-2012 10:18 AM

1 Attachment(s)
I have a timbersmith thumbhole on mine. That is freakin titties. The mags fit better then they did with the old stock. Check out milsurpstuff.com he's got lots of sks stuff.

UrbanNinja 04-01-2012 02:56 PM

Quote:

Originally Posted by sksmerc

haven't seen that stock yet I like the look of it how much was it.

They sell for about $60-70. It is usually black. I painted it O.D. Green.


All times are GMT. The time now is 09:12 PM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.