Are you a firearms enthusiast? Then we hope you will join the community. You will gain access to post, create threads, private message, upload images, join groups and more.
Firearms Talk is owned and operated by fellow firearms enthusiasts. We strive to offer a non-commercial community to learn and share information.
Not trying to be obvious here, but I saw a buddy the other day work for 20 minutes before he realized the bolt carrier and gas piston assy were still in the gun ?
Have you ever taken it apart before? I'm only asking because if you've never done it before it could be hard to figure out.
Behind the rear sight there is a lever that you will need to pull 3/4 the way up. Then use a small screwdriver to pry against the barrel and the tube. The tube should pop out.
Be careful you don't pull that lever up too much. Then you're in deep doo-doo.
I bleve that is what i did to my norinco the first time i cleaned it. It shot the little operating rod out of there with a good deal of force. It wasn't that easy to get it back in there, either.
please help, gas chamber is stuck
Linear Mode
