Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   AK & SKS Discussion (http://www.firearmstalk.com/forums/f19/)
-   -   Omg help (http://www.firearmstalk.com/forums/f19/omg-help-86714/)

urquidez 03-17-2013 12:30 AM

Omg help
 
1 Attachment(s)
I was going to clean my ak and when i took the mag out something fellout from were the mag goes here is a pic please help i dont know what it is

SSGN_Doc 03-17-2013 03:37 PM

It is often called a shepherds hook. It is a piece if spring wire that fits in the grooves in the pins that hold the hammer and trigger in place. The wire keeps the pins from walking out if the receiver. You can find a few websites that show how it should be routed if you google AK Shepherds hook.

urquidez 03-17-2013 04:23 PM

Ty for the info

trip286 03-17-2013 04:57 PM

May need to find out WHY it fell out to.

gearhead396 03-17-2013 05:06 PM

Damn ain't that a bitch good luck fixing it

7.62 Man 03-17-2013 05:13 PM

It goes back in one of these ways.

http://i46.tinypic.com/2w3cqr9.jpg

Or you could up-date your gun & install one of these plates.(easy to install)

http://ak-builder.com/index.php?dispatch=products.view&product_id=29836

urquidez 03-19-2013 12:31 AM

Thank you very much for.the help guys i managed to put it back in and it was pain in the arse but got ty again

Missouribound 03-19-2013 12:43 AM

Quote:

Originally Posted by urquidez (Post 1181582)
Thank you very much for.the help guys i managed to put it back in and it was pain in the arse but got ty again

The fact that it was a pain probably means you got it in right...and it may have been installed improperly for it to just "fall out":eek:.

SSGN_Doc 03-19-2013 12:52 AM

Quote:

Originally Posted by urquidez (Post 1181582)
Thank you very much for.the help guys i managed to put it back in and it was pain in the arse but got ty again

Yeah, that replacement plate is much nicer to use. A worthwhile upgrade to be sure.

urquidez 03-19-2013 03:33 AM

Quote:

Originally Posted by SSGN_Doc (Post 1181603)

Yeah, that replacement plate is much nicer to use. A worthwhile upgrade to be sure.

Yea i ordered one its on its way for next time


All times are GMT. The time now is 07:44 AM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.