Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   AK & SKS Discussion (http://www.firearmstalk.com/forums/f19/)
-   -   GP WASR 10/63 vs Egyptian Maadi (http://www.firearmstalk.com/forums/f19/gp-wasr-10-63-vs-egyptian-maadi-92454/)

MajorMoeDown47 06-18-2013 01:22 AM

GP WASR 10/63 vs Egyptian Maadi
 
Are they both reliable pro's and cons of both need to know!

JonM 06-18-2013 01:32 AM

just difference in ease of getting parts. the wasr 10/63 is more common for spares

SSGN_Doc 06-18-2013 04:18 AM

The Maadi is made in a factory set up by the Russians to the same specs as a Russian AKM. One big exception to that is the finish. The Maadi has a baked enamel finish instead of a parkerized finish.

YogiBear_727 06-24-2013 01:48 AM

I have a WASR, and it's very reliable. AKMs, as a general rule, are ridiculously simply built and easy maintain. That's why they work. Are there differences between the WASR 10 and other AKM models? Sure. When dealing with the newer crop of WASR 10s, I don't think the differences warrant the differences in price. Look for one with a Tapco trigger, which all of the newer ones come with, and make sure the front sight is straight up and down, and that's about it with WASR 10s. I personally didn't like my wooden furniture, so I replaced mine with a collapsible buttstock and a quad rail, but with how little I actually paid for the WASR 10, I was still able to do that and come out ahead. I am cheap, but, I like to get as much bang for my buck as I can, and for me, a WASR 10 was a way for me to do that.

SSGN_Doc 06-24-2013 02:11 AM

A WASR 10/63 that I bought as a bargain, because it was once completely covered end to end in black spray paint.

http://i43.tinypic.com/rmk7ic.jpg

sputnik1988 06-24-2013 02:27 AM

Quote:

Originally Posted by SSGN_Doc (Post 1284903)
A WASR 10/63 that I bought as a bargain, because it was once completely covered end to end in black spray paint.

http://i43.tinypic.com/rmk7ic.jpg

Man, that's a good looking WASR.

I should have bought 2 when my LGS had them for $379:( the sad thing is that was in 2009-2010

SSGN_Doc 06-24-2013 02:33 AM

Quote:

Originally Posted by sputnik1988 (Post 1284923)
Man, that's a good looking WASR.

I should have bought 2 when my LGS had them for $379:( the sad thing is that was in 2009-2010

Thanks I didn't take any before pics. It was just lumpy, runny, caked-on, flat black when I started. Took a few hours with paint stripper and a wire brush to get it all cleaned off. The parkerizing is just fine. Then I sanded and refinished the stock, used some cranberry and red mahogany. Finished it off with wipe-on polyurethane.

Quentin 06-25-2013 07:36 PM

That is a nice looking WASR, SSGN_Doc. Don't you love it when a deal like that comes along! A lot of work but worth it to save the money. My WASR is basically stock too. I got it cheap over 6 years ago so it was a ban version. I got rid of the muzzle nut and put on a good flash hider, then sanded the crappy wood, applied tung oil and repeated many times. There's really little else that must be done to get a decent AK.

msup752 06-26-2013 01:19 AM

I have a Maadi that I originally acquired in the mid 90's.
it is a jam o matic and seems to especially hate hollow points. I paid $400 for it and it is in my collection just so I can say I have an AK.

Garadex 06-26-2013 07:00 AM

Quote:

Originally Posted by msup752
I have a Maadi that I originally acquired in the mid 90's.
it is a jam o matic and seems to especially hate hollow points. I paid $400 for it and it is in my collection just so I can say I have an AK.

Not a bad excuse to own a gun.


All times are GMT. The time now is 08:17 PM.

Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.