Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   AK & SKS Discussion (http://www.firearmstalk.com/forums/f19/)
-   -   Double fire (http://www.firearmstalk.com/forums/f19/double-fire-65251/)

kmglocks 05-27-2012 09:22 PM

Double fire
 
Took my pal's norinco out to fire and had 2, 2 round bursts out of 20 rounds total. Bolt was clear of cosmo and excessive oil before firing. Just thought you guys might have an opinion of what might be the issue. Thanks!

7.62 Man 05-27-2012 11:22 PM

Does your pal have a light or short trigger pull on that Norinco?
It could be bump fire I have had a few unexpected bumps with my light trigger guns when my hold on the grip gets loose.

MikeJK 05-27-2012 11:38 PM

More than likely it's shooter error like mentioned above.

kmglocks 05-28-2012 12:14 AM

Quote:

Originally Posted by MikeJK
More than likely it's shooter error like mentioned above.

Good point to both, that seems to be the most likely issue. Gonna delve into it tonight to see if there's anything wrong internally.

gr8wapiti 05-28-2012 12:22 AM

I had an SKS once, if you wedged your finger up into the trigger it would double fire. My buddies AK-47 would do the same. We figured it was just a "thing" with those firearms and would avoid "wedging" our fingers into the triggers. Those guns we shot 1000's of rounds thru and never had any other problems except the occasional stove piped round.

MikeJK 05-28-2012 12:22 AM

Quote:

Originally Posted by kmglocks

Good point to both, that seems to be the most likely issue. Gonna delve into it tonight to see if there's anything wrong internally.

I would shoulder that rifle like a man :) and shoot it again before messing w/ anything internally.

kmglocks 05-28-2012 12:24 AM

Quote:

Originally Posted by MikeJK

I would shoulder that AK like a man :) and shoot it again before messing w/ anything internally.

Its an sks and it needs a good run through as i know the previous owner sucks at weapons maintenance but hanks.

Kalash1138 05-28-2012 04:11 AM

Quote:

Originally Posted by kmglocks (Post 816239)
Its an sks and it needs a good run through as i know the previous owner sucks at weapons maintenance but hanks.

STOP!!!! Check and make sure the firing pin will move freely in the bolt, before you shoot again. The SKS does NOT have a spring in the firing pins and you can be experiencing SLAM FIRE (meaning the firing pin is stuck in the forward position).


Watch the video!

Safe shooting!

kmglocks 05-28-2012 04:15 AM

1 Attachment(s)
Quote:

Originally Posted by Kalash1138

STOP!!!! Check and make sure the firing pin will move freely in the bolt, before you shoot again. The SKS does NOT have a spring in the firing pins and you can be experiencing SLAM FIRE (meaning the firing pin is stuck in the forward position).

Video Link: http://www.youtube.com/watch?v=xj3QtnUWCwQ

Watch the video!

Safe shooting!

Thanks, I knew this already though. I just gave the bolt a shot of brake cleaner and put it back together. Firing pin has NO hangups now. Thanks for the reply!

Attachment 47081

therewolf 05-28-2012 01:51 PM

Quote:

Originally Posted by kmglocks (Post 816107)
Took my pal's norinco out to fire and had 2, 2 round bursts out of 20 rounds total. Bolt was clear of cosmo and excessive oil before firing. Just thought you guys might have an opinion of what might be the issue. Thanks!

Actually, the chamber on these rifles is notorious for needing

special attention.

My AKs great, but needed a lot of work to get the

chamber cleared of preservative(?) before firing.

Be sure to check your loads, also. High primers

can also cause a "slamfire".


All times are GMT. The time now is 09:48 PM.

Copyright ©2000 - 2016, Jelsoft Enterprises Ltd.