Firearm & Gun Forum -

Firearm & Gun Forum - (
-   AK & SKS Discussion (
-   -   ak 47 quadrail issues (

Rattlesnak32 12-13-2012 12:26 PM

ak 47 quadrail issues
Ok i really need some help here. I have a century arms ak47 and it is an underfolder. I purchased a rail from utg and apparently its the wrong one. The top piece that mounts to the gas tube is too long. Does anyone have this model ak with a rail that works? Or at least know of one? Please help me out here im tired of wasting money!

SSGN_Doc 12-14-2012 12:46 AM

Which Century underfolder do you have? Romanian, Serbian(Yugo), etc.? Most of the UTG rails I've seen have an extended top rail, but they shouldn't effect fit. The long part should go out forward toward the front sight and end near the gas block.

Hendoproof 12-14-2012 12:17 PM

SSGN is right. I have that exact quad rail on my AK and it fits fine. Granted I have an Arsenal so it might be a bit different. But if its the AK in your avatar, from the looks of it, it should fit.

DrumJunkie 12-14-2012 01:34 PM

Is it the Yugo M70? Those have a shorter hand-guard. A lot of the parts are different on that particular model. I have one and had bough the receiver cover that has three rails on it and being it was for your garden variety AK clone it was too long. I ended up cutting it down to get it to fit.
Truth be told I can't remember seeing much of any parts that replace the hand-guard. Apex Gun Parts has some wood tha tare pulled off old commie rifles but the can be a little rough but they can be cleaned up some and made presentable I think I like the rail further back anyway though. Here's mine for reference...

mrjrs23 12-15-2012 04:03 AM

1 Attachment(s)
3 aks 3 different rails.. Utg is on one I can't remember which but they all took a little fitting. The Zatavas line have a different fit all together.

All times are GMT. The time now is 04:05 AM.

Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.