Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   AK & SKS Discussion (http://www.firearmstalk.com/forums/f19/)
-   -   AK 30 Round Mag (http://www.firearmstalk.com/forums/f19/ak-30-round-mag-56956/)

Chucklz97 02-04-2012 02:20 AM

AK 30 Round Mag
 
I just bought a 30 mag for my ak. When I load it it sticks. Is there a way to break it in, or is it just messed up? Any help would be great.

trip286 02-04-2012 02:22 AM

What kind of sticking? When you load bullets in it? Sticky putting the mag in the gun? Sticky pulling the mag out?

Chucklz97 02-04-2012 02:27 AM

sorry, sticky putting bullets in the mag

trip286 02-04-2012 02:29 AM

Is it milsurp? If so, you probably wanna take it apart, boil the pieces, rinse with hot water, scrub everything, and light coat of oil.

jpattersonnh 02-04-2012 12:26 PM

Are you sure it is correct? There are 7.62x39 and 5.45x39 mags. if you shoot 7.62x39 the mag will have a good curve to it. The 5.45 is curved, but not as much. If you remove the follower, it will be stamped. You can ID it from there. If the mag is bakalite, or polymer w/ a 10 or 21 in a circle, it is a Bulgarian AK74 mag.

rifleshooter474 02-04-2012 01:38 PM

Metal or Non Metal?

Chucklz97 02-04-2012 03:05 PM

Quote:

Originally Posted by rifleshooter474
Metal or Non Metal?

it is metal

rifleshooter474 02-04-2012 07:23 PM

Quote:

Originally Posted by Chucklz97 (Post 699153)
it is metal

Look for damage that would stop the follower, I have had a few ComBloc Mags with this problem, it don't take a big dent to do it.

Chucklz97 02-04-2012 11:50 PM

I went threw 30 rnds. it did just fine. I haven't tried to reload it yet, so we'll see.

locutus 02-05-2012 09:08 PM

Another vote for cleaning.

I have at least a dozen Norinco (Chinese) magazines, the best of the best, IMHO, but they all had to be boiled out and cleaned to get the heavy packing grease (cosmoline?) out of them. :D:D


All times are GMT. The time now is 07:36 AM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.