PT111 G2 locked up on teardown
I just brought this gun home today and as I was working with the slide to remove it, the trigger locked back and the slide is locked in place. I can't get the tear down button to work either. I'm new to this stuff folks. Help me out?
The mil pro pt111 doesn't have a "tear down button". You actually remove the entire lever by pulling it out after you rotate it clockwise. And then you pull the trigger(like a glock) to move the slide forward.
Idk. But I wouldn't think they would be crazy different. Generally if one type of gun from a certain manufacturer breaks down a certain way- most guns in that related line break down the same way. Yes to the trolls. There are exceptions that abound. But as a general rule if thumb it works like that. Double check the manual. It'll tell ya how to break it down. Also make sure the frame key locking mechanism isn't caught somehow(my wife's was locked when she looked at it the first time and even the dealer took a minute to catch it).
YouTube has several videos on how to break it down
Per the manual:
CARE AND MAINTENANCE
A. The firearm may be cleaned and lubricated under normal conditions
without the need of any disassembly.
B. In special conditions, such as repairs, when disassembling is necessary, it
is recommended the firearm be returned to the factory or sent to a competent
gunsmith or to the importer.
C. In order to keep a firearm in perfect condition it must be kept clean and
covered with a slight film of good quality oil to prevent corrosion. This is
especially necessary after use.
D. For normal cleaning of handgun not used or kept in storage for some time,
it is necessary to rub it with a lightly oiled cloth. In the same way proceed
with the bore of the barrel. The excess of oil must be removed, but a thin
protecting film should remain. Also the dust should be removed from all
crevices with a small, clean brush.
E. For cleaning after shooting, it is of special importance that all residues of
powder be removed from barrel and other adjacent areas subject to such
deposits, using an appropriate brush. If particles of lead are detected in
barrel they must be scrubbed with a brass brush, drenched with oil. Once
cleaned, lubrication should be done as above described. After shooting 200
shots in a row, your firearm should be cleaned before further shooting.
WARNING: Firing more than 200 shots in a row without cleaning your firearm
may create a hazardous situation.
And THAT is why ya ALWAYS read the manual ;)
|All times are GMT. The time now is 07:06 PM.|
Copyright ©2000 - 2016, Jelsoft Enterprises Ltd.