Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   General Rifle Discussion (http://www.firearmstalk.com/forums/f18/)
-   -   Would You Checkering Done To A Rifle With A Maple Stock? (http://www.firearmstalk.com/forums/f18/would-you-checkering-done-rifle-maple-stock-73219/)

SafariSam 09-26-2012 06:10 PM

Would You Checkering Done To A Rifle With A Maple Stock?
 
Right now i'm just in the planning stages and am wanting to have a 25-06 with a Mauser 98 action built with a light colored Maple stock with Rosewood fore-end and grip cap. i've pretty much decided on getting Randy Selby to build this rifle for me and what i'm wanting will cost me close to $3000.00 and checkering would be about $1000.00 more. This will be mostly a target rifle so would you get the checkering done or is there any real need for checkering on a target rifle? Thanks very much for any info on this.

Sniper03 09-27-2012 04:16 PM

Sam,

Only thinking out loud! May sound a little negative but I do not mean it that way.Only some honest thoughts to process regarding your question.
To begin with $3000 is a lot of money! May be worth it to you. And hope you have better luck with the 25-06 Caliber than I had in the past. Of course if he guarantees accuracy (Sub MOA) you are good to go. My opinion there is not that much need for checkering on a target rifle other than cosmetics. An maple is technically a softer wood vs walnut and others. Question being, if you hit the stock on something when checkered will it damage and crush the checkering? And a grand is a lot of money just for cosmetic reasons when that would go a long way on good Optics for the new target rifle.
Only my thoughts! Good luck with your project!:)

03

Old_Crow 09-27-2012 06:15 PM

If I was paying Randy Selby to build my rifle I wouldn't seek advice from an internet forum.

SafariSam 09-27-2012 08:33 PM

Quote:

Originally Posted by Old_Crow (Post 956631)
If I was paying Randy Selby to build my rifle I wouldn't seek advice from an internet forum.

i understand what you're saying but in my post i didn't say that i was 100% sure Randy would be building the rifle and also whoever i would get to build it i would like to get advice from other people besides the builder because you never know for sure if the builder would tell you that you need checkering just so they will get more money. also this forum is here to get info and advice from and that's what i'm doing.

SafariSam 09-27-2012 08:36 PM

Quote:

Originally Posted by Sniper03 (Post 956488)
Sam,

Only thinking out loud! May sound a little negative but I do not mean it that way.Only some honest thoughts to process regarding your question.
To begin with $3000 is a lot of money! May be worth it to you. And hope you have better luck with the 25-06 Caliber than I had in the past. Of course if he guarantees accuracy (Sub MOA) you are good to go. My opinion there is not that much need for checkering on a target rifle other than cosmetics. An maple is technically a softer wood vs walnut and others. Question being, if you hit the stock on something when checkered will it damage and crush the checkering? And a grand is a lot of money just for cosmetic reasons when that would go a long way on good Optics for the new target rifle.
Only my thoughts! Good luck with your project!:)

03

i don't take it in a negative way at all and i very much appreciate your opinion and on top of it all what you've said makes good sense to me. thanks.

locutus 09-28-2012 08:22 PM

Just my opinion, but of ot was my rifle, and I spent $3K on it, I'd use that extra thousand to move up to a Schmidt & Binder, Zeiss or Swarovski scope.

I don't know what you had budgeted for a scope, but add that 1,000 to it and I'll betcha you can get a top end scope.:)


All times are GMT. The time now is 11:49 AM.

Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.