I have a model 94 that is sheering off bits of brass when I chamber around. Has anyone else experienced this?
Join FirearmsTalk.com Today - It's Free!
Are you a firearms enthusiast? Then we hope you will join the community. You will gain access to post, create threads, private message, upload images, join groups and more.
Firearms Talk is owned and operated by fellow firearms enthusiasts. We strive to offer a non-commercial community to learn and share information.
Join FirearmsTalk.com Today! - Click Here
Sounds like a burr on the edge of the chamber. You could likely feel it with your finger.
Just walking on the edge of of my grave.
It's right under "30-30"
Oh, that looks like the extractor is doing it.
That is the extractor. The question is is it doing it when chambering or when extracting the round?
Shoot me an email at firstname.lastname@example.org
Check out the Firearmstalk Podcasts with Vikingdad and DrFootball! https://itunes.apple.com/us/podcast/firearms-talk-podcast/id778007899
I am almost certain it's happening as it chambers
A couple of things-
Could be debris under the extractor so it is just barely catching the rim of the cartridge, that could conceivably cause that mark.
Extractor could be broken or screwed-up where it contacts the cartridge rim.
I appreciate the input. I just dropped it off at the gunsmith to get looked over. Thanks