Firearm & Gun Forum -

Firearm & Gun Forum - (
-   General Rifle Discussion (
-   -   Winchester Model 94 (

sjkellys 04-04-2013 11:11 PM

Winchester Model 94
I have a model 94 that is sheering off bits of brass when I chamber around. Has anyone else experienced this?

hiwall 04-04-2013 11:31 PM

Sounds like a burr on the edge of the chamber. You could likely feel it with your finger.

sjkellys 04-04-2013 11:41 PM

1 Attachment(s)
It's right under "30-30"

Attachment 94529

hiwall 04-05-2013 04:17 AM

Oh, that looks like the extractor is doing it.

Vikingdad 04-05-2013 04:20 AM

That is the extractor. The question is is it doing it when chambering or when extracting the round?

sjkellys 04-05-2013 03:35 PM

I am almost certain it's happening as it chambers

hiwall 04-05-2013 05:52 PM

A couple of things-
Could be debris under the extractor so it is just barely catching the rim of the cartridge, that could conceivably cause that mark.
Extractor could be broken or screwed-up where it contacts the cartridge rim.

sjkellys 04-06-2013 07:49 PM

I appreciate the input. I just dropped it off at the gunsmith to get looked over. Thanks

All times are GMT. The time now is 01:04 PM.

Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.