Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   General Rifle Discussion (http://www.firearmstalk.com/forums/f18/)
-   -   Velocity in a short barrel (http://www.firearmstalk.com/forums/f18/velocity-short-barrel-51659/)

grizzlymag 11-12-2011 03:04 PM

Velocity in a short barrel
 
Recently purchased a Ruger #1 in 375 H&H with a twenty inch barrel, I was wondering what the velocity difference is between a twenty inch barrel and the original twenty four inch barrel?

Jpyle 11-12-2011 03:27 PM

No simple answer, all weights, powder loads etc will differ but here are some chrono results by caliber and barrel length...

BBTI - Results

grizzlymag 11-12-2011 03:44 PM

Great thank you for the information I'll reload with some faster burning powder and I'll chronograph the results

BlueTurf 11-12-2011 03:55 PM

If you are shooting a .375 H&H I would suggest you do some research before you start looking to faster powders for higher velocities. The information I have reviewed suggests that especially in the large magnum calibers the slower powders will actually produce the higher velocities. The shorter barrel does not change this situation. I have a Remington 788 in .243 with a 18 1/2 " barrel. I have tested a lot of different powders suggested for the .243, from the fastest to the slowest, and the slower powders have produced the higher velocities. H4350 produced not only the greater velocities but grouped them better also.


All times are GMT. The time now is 04:20 PM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.