Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   General Rifle Discussion (http://www.firearmstalk.com/forums/f18/)
-   -   Ruger Carbines (http://www.firearmstalk.com/forums/f18/ruger-carbines-36670/)

Trez 01-09-2011 05:33 PM

Ruger Carbines
 
1 Attachment(s)
Heres my "set" of Ruger carbines. on top is a 10/22. i got it from a friend, who knew i wanted one, for $25. it was in pretty bad shape. after some cleaning and replacing a few parts, it turned out to shoot great. as a added bonus it seems to be a special edition, the barrel is stamped "Made in the 200th Year of American Liberty" i take it to be a 1976 model?
Underneath is my .44 carbine, looks identical to the 10/22, but holds 4+1 and loads like a shotgun. from what i can tell it was made sometime in the 60's and not for very long.
i see lots of 10/22 but not many of the .44 carbines, so i thought id share.

monet61 01-09-2011 05:38 PM

Ruger
 
Nice firearms, I've always wanted one of the .44s'.

CA357 01-09-2011 06:03 PM

I had a Ruger .44 carbine and I miss it. Hang on to yours, it's a great piece.

JonM 01-09-2011 06:26 PM

nice :). my 44 ruger carbine also has the liberty stamp. it always draws a small crowd at the range.

7point62 01-09-2011 08:07 PM

Nice Rugers. Did you do any stock restoration? They look like they're in great shape.

Trez 01-10-2011 01:16 AM

the .44 is all original.
the 10/22 was covered with a layer of surface rust, i was lucky and it cleaned off with out harming the bluing. replaced some internals. bought some cool looking clear factory 10-rd mags (the old one is pretty worn out). someone over sanded the original stock so it was no longer flush at the magazine. the hardest part was finding a stock that matched the .44, but ended finding one on ebay.

HKSlinger 01-10-2011 01:23 AM

I've always loved those little .44s. Always wanted one. But alas,it wasn't in the stars. Looks like it would be a great brush gun.http://NEW 945

HKSlinger 01-10-2011 01:47 AM

I had to settle for this. Not too hard to live with.;) Don't mean to turn this into a 10/22 conversation.


All times are GMT. The time now is 02:28 PM.

Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.