Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   General Rifle Discussion (http://www.firearmstalk.com/forums/f18/)
-   -   Replacement iron sights. (http://www.firearmstalk.com/forums/f18/replacement-iron-sights-53020/)

bigbomar4 12-05-2011 02:56 AM

Replacement iron sights.
 
I have an old Remington model 740 that had the rear iron sight removed at some point in its life to fit its current scope. I want to turn this gun into a combo hog and deer rifle so I would like the rear iron sights back. I cant find a replacement rear sight because everything I have found shows that this gun had a screw on rear sight but mine was dovetailed in. I would also need the sight to be tall enough to be seen over a weever rail since I will also have a scope on it with see through mounts. I have no problem with also replacing the front sight that is dove tailed into a ramp that looks like it is made onto the barrel. I would also like if this rear sight would look kinda correct on the gun aka no fiber optics for the 1955ish rifle. Sorry for such a long post.

Thanks for any help.

hiwall 12-05-2011 03:14 AM

I freely admit that I thought they all had screw-on rear sights. The easy way would be to look at the rear sights at Brownell's and pick a high one that you like.

bigbomar4 12-05-2011 04:21 AM

By the markings on the barrel the it was made in February of 55, 81 or 07. So this was a very early production or the barrel was changed. I have looked at Brownells sights but I have no idea if any of them would work. Have any of yall done something like this before? Any input would be great.

Marlinman 12-05-2011 04:51 AM

Quote:

Originally Posted by bigbomar4
By the markings on the barrel the it was made in February of 55, 81 or 07. So this was a very early production or the barrel was changed. I have looked at Brownells sights but I have no idea if any of them would work. Have any of yall done something like this before? Any input would be great.

You might try to get an all metal dove tailed sight from marlin also. Ask for a sight for an 882 or 883.
Or this one is like the one that is supposed to be on that barrel.

http://www.brownells.com/.aspx/pid=26039/Product/

hiwall 12-05-2011 12:57 PM

Put on your scope mounts then put something in the rear dovetail that is high enough to see with the mounts on. Measure what you put in the dovetail to get an approximate height for your sight.


All times are GMT. The time now is 09:24 PM.

Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.