Problems with my new 700 Varmint
Firearm & Gun Forum - FireArmsTalk.com > Long Guns > General Rifle Discussion > Problems with my new 700 Varmint

Reply
 
LinkBack Thread Tools Display Modes
Old 05-14-2012, 11:55 PM   #1
Feedback Score: 0 reviews
 
Join Date: May 2012
Posts: 1
Default Problems with my new 700 Varmint

I'm new to the forum, but there seems to be good info here so i thought that i'd post my question. I bought a new 700 ADL Varmint. I can not for the life of me get it shoot a group. Both my brother and I have tried, we are experienced shooters, so I'm sure it's the rifle. I have tried two different scopes, two sets of mounts, check the tightness on all mount screws and the bottom bolts also, they all seem to be set right. A little about what the rifle is doing... When the scopes first go on, I fire a round and make the necessary adjustment. The second round will go in the expected area of the adjustment. But the following next few rounds move up and right (up to 5" at 100 yds). After going down to the 100 yard mark and looking closer at the target and then returning (rifle has cooled), the strike of the round goes back down towards the original intended area and moves back up and right on the following shots. So my thoughts are that it has something to do with the cheap stock. But i'm not certain and would love some feedback. If i am correct, how is Remington about fixing this problem. I know the adl is not best rifle they make, but it is the same barreled action just on a cheaper stock. 5 MOA is certainly not acceptable and I'm sure they realize that. Any comments would be appreciated, let me know if you need some more info to help my diagnose this, i'd be happy to provide it.

__________________
bheath0881 is offline  
 
Reply With Quote

Join FirearmsTalk.com Today - It's Free!

Are you a firearms enthusiast? Then we hope you will join the community. You will gain access to post, create threads, private message, upload images, join groups and more.

Firearms Talk is owned and operated by fellow firearms enthusiasts. We strive to offer a non-commercial community to learn and share information.

Join FirearmsTalk.com Today! - Click Here


Old 05-15-2012, 03:37 AM   #2
Crazy Azz Redneck
FTF_SUPPORTER.png
Feedback Score: 0 reviews
 
Txhillbilly's Avatar
 
Join Date: Oct 2008
Posts: 3,523
Liked 1196 Times on 686 Posts
Likes Given: 575

Default

It sounds like the barrel may be touching the stock somewhere.
Have you looked to see if the barrel is free floated from the tip of the stock to the recoil lug? If you cant pull a dollar bill freely between the barrel and stock to the recoil lug,you may need to relieve the stock,and bed the action also.

Are you shooting off of bags,or a bipod? There could be some problem with the stock flexing when the gun is held and fired,and this can also be fixed by relieving the stock and also bedding the action.

When checking the action screws,did you use a torque wrench?
If the screws aren't torqued properly,that can also cause problems with bad groups

Ammo-Are you shooting ammo that will work for the twist rate of your barrel? Depending on the caliber of your rifle,the ammo your trying to shoot may not work with the twist rate of your barrel.Your rifle may also just not like to shoot that particular brand/style of ammo that you have tried.

Did you clean the barrel before shooting the gun?
How many rounds have you fired out of the rifle?
Did you do any kind of barrel break in? If not,the barrel may be copper fouled,and that will cause bad groups also.

There are many things that can cause a new rifle to shoot bad groups,but most can be fixed pretty easy.

__________________
Txhillbilly is offline  
 
Reply With Quote
Old 05-21-2012, 05:15 AM   #3
Feedback Score: 0 reviews
 
Hookeye's Avatar
 
Join Date: Dec 2011
Posts: 823
Liked 246 Times on 157 Posts
Likes Given: 18

Default

Check the stock...............yank the barreled action from it and see if the stock is clearanced for the screw that holds the magazine body to the action. If it isn't then your action screws are in funky tension (even if properly torqued to spec).

Do that and test.

If it still acts stupid then free float the bbl.

BTW, I drink Double Crooked Tree Ale (acceptable as payment)

__________________
Hookeye is offline  
 
Reply With Quote
Reply

Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Firearms Forum Replies Last Post
What is a varmint? GREGULON General Rifle Discussion 18 04-10-2012 03:32 PM
Cz 527 varmint npink General Rifle Discussion 7 02-20-2012 02:08 AM
cz varmint 452 vs 453 crustydownunder .22 Rifle/Rimfire Discussion 10 07-04-2011 12:34 PM
CZ 550 Varmint .308 willfully armed General Rifle Discussion 6 03-04-2010 02:11 AM
CZ 452 varmint ccd8541 Range Report 10 08-29-2009 11:27 PM