Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   General Rifle Discussion (http://www.firearmstalk.com/forums/f18/)
-   -   Mauser K98 Custom Build (http://www.firearmstalk.com/forums/f18/mauser-k98-custom-build-101554/)

texaswoodworker 12-14-2013 06:02 AM

Mauser K98 Custom Build
 
Let me start this thread by saying that while it may look like I know exactly what I want for this build, I am open to ALL suggestions. This type of custom building is completely new to me, so this thread will hopefully be helpful in getting me going in the right direction.

The receiver I have is a Mauser K98 made by Mauserwerk in Oberndorf between 1935-1938 (a dirty bird told me. ;)). The receiver is almost as bare as it can be. No bolt, mag, trigger, nothing except Only the barrel and front sight. So I will need to track down all the odds and ends to get this build going.

http://pics.gunbroker.com/GB/3787190...x202888624.jpg

http://pics.gunbroker.com/GB/3787190...x306900352.jpg

I got the receiver for a pretty decent price, so this doesn't bother me.

texaswoodworker 12-14-2013 06:09 AM

Chambering
 
This gun will not be chambered in 8mm Mauser for much longer. The main goal of this build is accuracy, so I have chosen a caliber that has a history of accuracy. 6.5mm. There are numerous rounds that are 6.5mm, but I am leaning heavily towards 6.5x57mm.

I can make the brass for this round from a LOT of other cartridges, so it wouldn't have to worry about finding 6.5x57mm brass, or paying the prices the comes with it. It would also allow me to use the same unmodified bolt, and magazine since it is pretty much just a necked down version of the 8mm Mauser.

It is ballistically similar to the 6.5x55mm Swede.

http://media.midwayusa.com/productim...970/970870.jpg

sputnik1988 12-14-2013 06:14 AM

:eek: Is it original?

Me personally, I would build it into a factory new WWII Mauser in a more practical caliber.

Btw, how is the bore, you want to sell the barrel?;)

texaswoodworker 12-14-2013 06:17 AM

Barrel
 
This is where I am really open to suggestions. The barrel. I want it to be heavy enough to allow me to shoot a lot of rounds with little variance in accuracy, but not super heavy if possible. I wanting this rifle to shoot sub MOA groups at 500+ yards. Any suggestions on contours, makers, ect?

BTW, I will also be shooting mainly 120gr-140gr bullets. What twist rate would be best?

texaswoodworker 12-14-2013 06:26 AM

Quote:

Originally Posted by sputnik1988 (Post 1458308)
:eek: Is it original?

Me personally, I would build it into a factory new WWII Mauser in a more practical caliber.

Btw, how is the bore, you want to sell the barrel?;)

Is it original? Well, it's as original as a gun stripped of ALL it's parts minus a bare receiver, front sight, and barrel can be. Honestly, I could never bring myself to modify a complete milsurp. This one though? A lot of the history is gone. It's no longer original. A complete original K98 is on my list of guns to get though. :D

As for the barrel, as soon as I get it off the receiver, it's for sale. ;)

The bore is dark, but sharp. I haven't taken a really close look at it yet, but I haven't seen any pitting. I haven't cleaned it yet though, so I'll update this thread when it get her cleaned and have a better look at her. Are you interested?

Finally for the caliber. It's not very common, I'll have to mostly reload for it and form my own brass, and it one that not many American shooters (it's popular in Europe for hunting) have even heard of. This is exactly why I like it (other than it's accuracy). It's rare, interesting, and a bit of an oddball in America. I have a thing for rounds like that. :D

sputnik1988 12-14-2013 06:51 AM

I'd be interested in the barrel if the bore turns out to be good. My K98 Is all matching but the bore is shot:(.

Looking forward to the build. The 98 is one of the best platforms for a custom rifle.

texaswoodworker 12-14-2013 07:20 AM

Quote:

Originally Posted by sputnik1988 (Post 1458317)
I'd be interested in the barrel if the bore turns out to be good. My K98 Is all matching but the bore is shot:(.

Looking forward to the build. The 98 is one of the best platforms for a custom rifle.

I've got it soaking in some bore foam now. ;)

fnzeee 12-14-2013 07:49 AM

This is a worthwhile endeavor. Agree with you on going with 6.5...VERY accurate round and as you said easy to adapt brass from many other more common calibers down to the 6.5.

Axxe55 12-14-2013 08:58 AM

TWW, looks like the basis for an interesting build that i want to see happen.

personally, i like the idea of the cartridge you have chosen, and for the same reasons as you chose it for. i too am a sucker for the oddball stuff!

my suggestions for the barrel? i would go a heavier varmint contour, and maybe even give some thought to fluting to help with cooling the barrel a bit. i would see what the optimum length is for that particular cartridge and then also do a target crown on the muzzle.

all the other odds and ends? Brownell's and MidwayUSA are going to be your friends! both carry lots of parts for the Mauser rifles. Boyd's Gun Stocks carries a lot of different stock options for that actions as well, in laminates and walnut. also don't forget about Numrich either.

tagging along and looking forward to seeing this rifle being built.:D

RaySendero 12-14-2013 01:30 PM

Quote:

Originally Posted by texaswoodworker (Post 1458309)
This is where I am really open to suggestions. The barrel. I want it to be heavy enough to allow me to shoot a lot of rounds with little variance in accuracy, but not super heavy if possible. I wanting this rifle to shoot sub MOA groups at 500+ yards. Any suggestions on contours, makers, ect?

BTW, I will also be shooting mainly 120gr-140gr bullets. What twist rate would be best?



tww,

1) I like the 6.5x57, but since you have an action that will handle 30-06 length cartridges - you should really consider the 6.5-06. The bottom metal and magazene you'll need to find for that action will also accomodate the 6.5-06. An extra 150 FPS at the muzzle will also help your 500 yd accuracy goal - i.e. less wind drift, etc.

2) I used Shillen in the past but most manufacturers offer a "magmum contour" barrel - This should be close to what your describing you want.

3) Looking up 6.5 bullet lengths, shows 140 gr BTs are 1.26" to 1.43" long w/ the Berger target bullets being the longest. So your be looking for a barrel w/ twist rates of 1:9 to 1:7.

Here's how the barrel decision gets entwined w/ twist rate:
The faster Mz velocity requires less twist to stablize the bullet. So a 1:9 will work well with the 6.5-06 and a 26" barrel. Now, that heavier barrel contour will add some significant weight the longer you go. S&B lists a Mz velocity of only 775 m/s w/ a 60 cm barrel length for their 6.5x57. At that lower velocity and a shorter 22" barrel the twist rate needs to be increased to 1:7 and the barrel weight is lower. Inbetween is the 1:8 twist rate plus you can probably better that 6.5x57 S&B velocity with reloading.


All times are GMT. The time now is 01:27 PM.

Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.