Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   General Rifle Discussion (http://www.firearmstalk.com/forums/f18/)
-   -   Marlin 1984CB won't feed right. (http://www.firearmstalk.com/forums/f18/marlin-1984cb-wont-feed-right-30763/)

MotorbikeDon 08-23-2010 01:30 AM

Marlin 1984CB won't feed right.
 
Okay boys, I am new to Marlin's.

I just picked up my new CB for cowboy shooting. If feed .38 and .357 just fine, but the action was stiff.

So, after taking the bolt out for the first time, polishing the parts that shown contact with some rouge, and cleaning/oiling well, it won't feed anything.

Sure, I am betting it's operator headspace and timing, but can someone help me out?

Thanks,

Motorbike don

danf_fl 08-24-2010 01:22 AM

Check tension of screws would be the first thing. If you had a part or two extra, That may also be part of the problem.
(Look closely at the loading gate area.)

cpttango30 08-24-2010 05:01 PM

Oh no another "I has Dremel i's be gunsmifth". Is what it sounds like to me.


All times are GMT. The time now is 12:39 PM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.