Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   General Rifle Discussion (http://www.firearmstalk.com/forums/f18/)
-   -   Got them back today (http://www.firearmstalk.com/forums/f18/got-them-back-today-37193/)

Silvertip 44 01-21-2011 08:19 PM

Got them back today
 
2 Attachment(s)
This is the Newly improved .308. Ol Hook bedded both the Mil specs.

Remington M700 Mil spec 5R .308
Jewell Trigger Mechanism
Nightforce 3.5-15X50 NXS w/high speed .01 milrad turrets, zero stop
Nightforce rings
Badger 20 MO base

I luv my rifles!!!!

CA357 01-21-2011 08:33 PM

Very nice. How does it shoot after the improvements?

jpattersonnh 01-21-2011 08:42 PM

Very nice! Now pop a few pigs at distance. I got a call about a boar in western NH that has been raising hell out there, but sadly The heavy snow made it impossible to get out there. He screws when ever anyone gets within 200 yards. There is a game park, Corbin park that they keep escaping from. European Boar. I actually want to use my M41b in 6.5x55 or my Howa HB in .308 for him. He is estimated at 175..200lb.s. He was a stud boar.

Silvertip 44 01-21-2011 09:58 PM

If the weather is good next Thu or Fri I will take it out and burn some powder. I would like to go earlier but there is a forcast of freezing rain for the first of the week.
My objective is to build a load that gives excellent results in both the 5R and my M1As. I will experiment with 168 gr. SMKs and Hornady Amax using IMR 4895 and CCI primers.
Previously I got half minute groups at 100 with 42 gr. IMR 4895 and 168 SMK in the 5R before bedding and the trigger change. I'm sorta stuck on 168s.

IGETEVEN 01-21-2011 10:03 PM

Very nice, clean looking Remy .308 there JP! :D I sure like em that way. :cool:

jpattersonnh 01-21-2011 10:18 PM

You may want to try a slower powder, like IMR4064. You may loose a little velocity, but gain accuracy. I really like 165gr BT for all around paper punching and hunting. If you want the extra 25fps, try BLC(2). 4064 is not very temperature sensitive as others.


All times are GMT. The time now is 10:54 PM.

Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.