Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   General Rifle Discussion (http://www.firearmstalk.com/forums/f18/)
-   -   A good rail for a remington 700..? (http://www.firearmstalk.com/forums/f18/good-rail-remington-700-a-98902/)

icallshotgun88 10-15-2013 11:02 PM

A good rail for a remington 700..?
 
Looking for your suggestions on a good rail for a Remington 700 so I can mount a scope on it later..

The only one I saw at the store was a 20 MOA rail by Nightforce for $115

Thoughts?

hoovco 10-15-2013 11:47 PM

La rue makes a good rail for like 75 bucks.

TheSadPanda 10-16-2013 12:01 AM

https://www.midwestindustriesinc.com/index.cfm?fuseaction=category.display&category_ID= 387

Txhillbilly 10-16-2013 12:09 AM

I like Ken Farrell rails,but also have a couple Weaver's and EGW's. They all work great.

Midway carries a bunch of them.

http://www.midwayusa.com/product/147376/egw-1-piece-picatinny-style-20-moa-elevated-base-remington-700-short-action-matte

http://www.midwayusa.com/product/1477228687/weaver-1-piece-extended-multi-slot-tactical-picatinny-style-base-remington-700-short-action

sandog 10-16-2013 01:29 AM

+1 on the Farrell rails.

icallshotgun88 10-17-2013 12:24 AM

I decided to go with the 20 MOA Nightforce rail...

Got great reviews online and wasn't too expensive..

JonM 10-17-2013 01:07 AM

good choice nightforce is top notch.

tomgodd 10-17-2013 01:37 AM

JB weld is used to bed the base to the action.
I own a model 788 Remington 308. I wanted a picatinny rail to mount my scope on it. I was stuck with buying a EGW. I got it in 20 moa so I could stretch the 308 out a bit. I used JB weld to bed the base to the action. I used 8541 tactical scope base install instructions. Google will get you were to the site. I have not shot out past 300 yet as I have mot had time to get to a range any farther.
The reason why I bedded my base was the EGW did not fully meet the action with out a gap. I shot the gun before I bedded the base and it was all over the place. Talked to a friend and he suggested bedding it. Now it is a great shooter out to 300 so far.
Good luck and hope this helps

Thomas

tomgodd 10-17-2013 01:46 AM

2 Attachment(s)
Here is a picture of the gun

Attachment 122689

If you can see. This is the back of the base where I bedded it...

Attachment 122690

tomgodd 10-17-2013 01:53 AM

I posted in the wrong thread. I was addressing the op post asking a question about installing a scope base on a 700. Whoops. Sorry!
If a mod could move it I would appreciate it.


All times are GMT. The time now is 03:31 AM.

Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.