Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   General Rifle Discussion (http://www.firearmstalk.com/forums/f18/)
-   -   Gew 98 ati stock ?? (http://www.firearmstalk.com/forums/f18/gew-98-ati-stock-33306/)

LeMerle 10-20-2010 03:35 PM

Gew 98 ati stock ??
 
Hi,

I want to scope this 8mm beast. What are my option,

Is an ATI 98 mauser stock a good choice ?

my rifle is not a standart gew, its a depot rifle, sporterized
http://i881.photobucket.com/albums/ac16/jocle12/DSC02368.jpg
http://i881.photobucket.com/albums/ac16/jocle12/DSC02373.jpg

i think it's the standart bolt..
so will the mauser stock from ATI will fit directly on it ?
That would be fantastic

thanks everyone !:p

General_lee 10-20-2010 05:19 PM

You'll have to take it to a gunsmith and have him drill and tap for scope mounts, and probably have to change out the safety lever.

I have a sporterized 95 Mauser (small ring) in .308 that my boss/gunsmith gave to me.
That's what we had to do with mine, should be a similar process with yours.

I don't know enough about the ATI stock to say, hopefully someone else will come along.

BTW, Welcome to the forum!
We have an introductions section if you'd like to tell us a little about yourself:)

Fisherking 10-20-2010 05:53 PM

I have seen and I can't remember where but there is a mount that ataches to where the rear sight goes. Screw off the rear sight screws and atach the one piece base mount.
Try googleing it.
F.K.
P.S. try Brownells.

Fisherking 10-20-2010 06:01 PM

I have seen and I can't remember where but there is a mount that ataches to where the rear sight goes. Screw off the rear sight screws and atach the one piece base mount.
Try googleing it.
F.K.
P.S. try Brownells.
Brownells has it it is a B-square mount that uses the rear sight base. You will need a longe eye relief scout scope or handgun scope. It is $30.00 part # for M98 is 122-185-610AC
Brownells # 800-741-0015

robocop10mm 10-20-2010 09:26 PM

The Mauser stock has an integral Weaver rail for scope mounting. You still have to convert the bolt to bent configuration unless you mount an EER scope scout style.

AFAIAC, these stocks are butt ugly.

jpattersonnh 10-21-2010 12:00 AM

Quote:

Originally Posted by robocop10mm (Post 371682)
The Mauser stock has an integral Weaver rail for scope mounting. You still have to convert the bolt to bent configuration unless you mount an EER scope scout style.

AFAIAC, these stocks are butt ugly.

A rail mounted to the stock is not the best idea I've ever seen.


All times are GMT. The time now is 04:35 AM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.