[JTJ]

The older Win 94 used a top eject. The newer 94's had angle eject and would take a top mounted scope. There are barrel mount rails available for a scout type set up. My personal preference runs to lower power and a 2-7 would be my max. I would go 1-4 myself. Burris makes a Fullfied II in your price range as does Redfield. You would need a pistol scope for the scout set up.

[303tom]

.30-30 ? I would not break the bank, try one of these, great scopes.

http://www.midwayusa.com/product/417845/simmons-8-point-rifle-scope-4x-32mm-truplex-reticle-matte

[Foskco]

Thanks for the help, I'm going to try w/o a scope for a few weeks first, never shot it w/o one. It had an All-Pro on it.

[axxe55]

Originally Posted by Foskco

Thanks for the help, I'm going to try w/o a scope for a few weeks first, never shot it w/o one. It had an All-Pro on it.

nothing wrong with going with open sights on the M94. there are many who hunt with lever actioned rifles who can't bear putting a scope on one. i pesonally like a lever action without a scope, but there are those who like a scope on one. try it without a scope, you might just like it like that.

[Marlinman]

Originally Posted by axxe55

nothing wrong with going with open sights on the M94. there are many who hunt with lever actioned rifles who can't bear putting a scope on one. i pesonally like a lever action without a scope, but there are those who like a scope on one. try it without a scope, you might just like it like that.

Except for my 39a and my 308mxlr i wont put a scope on a lever action. 30/30 is the reason. Simply bc to me a 30/30 is more accurate w irons than w a scope.....then again i dont think its a great round anyways. Seen to many deer run after being shot w one that shouldnt have moved.

God didnt make all men equal colonel Sam Colt did

[glockman55]

Originally Posted by Foskco

Thanks guys check out my maverick 88 post if you're good with shotgun modz.

Do you have the short screws to put in the holes?( for your 94?) don't loose the lever pin thats in the bigger hole, with the top eject you will more that likely have to mount your scope ass back wards, with the side wind age as up and your up/down wind age to the left side to allow the empties to clear the scope when ejected.. if this makes sense to you..

[Foskco]

Lol, I found out about that pin the hard way. Were could I purchase a short screw for the hole? I bought the gun from my nieghbor with the scope and he didn't give it to me. Lol I didn't even know about it till the pin fell out yesterday during cleaning had to get it back in... =[

Live and learn.

[glockman55]

Originally Posted by Foskco

Lol, I found out about that pin the hard way. Were could I purchase a short screw for the hole? I bought the gun from my nieghbor with the scope and he didn't give it to me. Lol I didn't even know about it till the pin fell out yesterday during cleaning had to get it back in... =[

Live and learn.

http://www.gunpartscorp.com/catalog/Products.aspx?catid=7520

# 22...301260 Finger Lever Pin Stop Screw..$3.30
#23...301280 Finger Lever Pin..$3.95 ( if you want a spare)
#26...260100D Sight Plug Screws...$3.05 X2..

[007BondJamesBond007]

I got the Nikon Prostaff Scope on my wife's Marlin 30 30. Nice scope bright, clear, BDC and lifetime warranty.