This is concerning a chinese model SKS with a sythetic stock. Does anyone have information on how to disassemble THIS SPECIFIC gun... there is a little lip on the stock behind the reciever cover that dont allow me to slide it back once unlocking the pull pin. do i have to disassemble the trigger ground before removing this part? it is a chinese model screwed in barrel with triangle stamp listing the numbers 26 inside the triangle on the plate below the bolt of the gun. appreciate the help from anyone thanks!
here is the firearm i can add more pics if required...
Last edited by Skoal_Chewin_Redneck; 03-26-2009 at 04:16 AM.
ok i see now. i think you will need to remove the trigger group (behind the trigger guard is a button,put the saftey on and push on the button with a screw driver and it should pop out. if you have a pistol grip you may need to remove it first) and mag.then push up through where the trigger group was and the stock should come off.you may have to remove the gas tube also.
this video may help you out,too.once you know how it should come apart you can probably figure it out.