Firearm & Gun Forum -

Firearm & Gun Forum - (
-   General Rifle Discussion (
-   -   Chinese Model SK (

Skoal_Chewin_Redneck 03-25-2009 06:02 AM

Chinese Model SK
This is concerning a chinese model SKS with a sythetic stock. Does anyone have information on how to disassemble THIS SPECIFIC gun... there is a little lip on the stock behind the reciever cover that dont allow me to slide it back once unlocking the pull pin. do i have to disassemble the trigger ground before removing this part? it is a chinese model screwed in barrel with triangle stamp listing the numbers 26 inside the triangle on the plate below the bolt of the gun. appreciate the help from anyone thanks!

here is the firearm i can add more pics if required...
url= albumID=612683&imageID=7384350

subie-jeep 03-28-2009 04:44 AM

you should just have to flip up and pull out on the pin then it should just slide back easy.
maybe if you posted a pic of the lip you are talking about i could help out alittle more.

Benning Boy 03-28-2009 05:36 AM

Should flip back toward you 90 degrees, then wiggle it to the left. Whole thing will lift off, but these things can be stiff, especially if it was "Bubbaed".

Skoal_Chewin_Redneck 03-28-2009 08:15 PM

RE: Chinese SKS
it is pretty damn stiff now that u mention it. i have never got this gun apart and have owned it for about a year. here are some pics

<a href=" albumID=612683&imageID=11783218"><img src="" alt="" /></a>

<a href=" albumID=612683&imageID=11783220"><img src="" alt="" /></a>

<a href=" albumID=612683&imageID=11783217"><img src="" alt="" /></a>

Skoal_Chewin_Redneck 03-29-2009 03:44 PM

RE: SKS pictures
My Photos Photo Gallery - Photo 8 of 9 by __________Slow__________ - MySpace Photos

here is were i am stuck it wont pull up anymore than that and it will not slide back because of the stock behind it. any ideas?:mad:

allyellow 03-30-2009 07:01 AM



allyellow 03-30-2009 07:03 AM


this might help didn't think the first one worked.

subie-jeep 04-03-2009 01:03 AM

ok i see now. i think you will need to remove the trigger group (behind the trigger guard is a button,put the saftey on and push on the button with a screw driver and it should pop out. if you have a pistol grip you may need to remove it first) and mag.then push up through where the trigger group was and the stock should come may have to remove the gas tube also.

this video may help you out,too.once you know how it should come apart you can probably figure it out.

All times are GMT. The time now is 01:04 AM.

Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.