Firearm & Gun Forum - FireArmsTalk.com > Long Guns > General Rifle Discussion > Awesome New Action

Reply
 
LinkBack Thread Tools Display Modes
Old 09-14-2008, 06:54 PM   #1
Feedback Score: 0 reviews
 
Join Date: Mar 2008
Location: I see you, and you will not know when I will strike
Posts: 24,301
Liked 3471 Times on 1606 Posts
Likes Given: 3590

Default Awesome New Action

Anyone seen this new offering from Badger Ordnance?

Wow! What a great design. 6 locking lugs. 60 degree bolt throw. One serious lock up when closed. No way is this baby blowing up on you.

Remington compatible, it will take any drop in trigger and fits all Remington stocks including the AICS from Accuracy International. McMillian and Manners are both producing custom stocks for it, as well as H-S Precision expected before the end of the year.

It's a limited production run - but if it takes off, they will be bulk producing the action next year in both short and long action variants.

What do you guys think?

JD

__________________
Dillinger is offline  
 
Reply With Quote

Join FirearmsTalk.com Today - It's Free!

Are you a firearms enthusiast? Then we hope you will join the community. You will gain access to post, create threads, private message, upload images, join groups and more.

Firearms Talk is owned and operated by fellow firearms enthusiasts. We strive to offer a non-commercial community to learn and share information.

Join FirearmsTalk.com Today! - Click Here


Old 09-14-2008, 07:05 PM   #2
Feedback Score: 0 reviews
 
RL357Mag's Avatar
 
Join Date: Apr 2008
Location: Albany,New York
Posts: 3,252
Liked 4 Times on 4 Posts

Default

It's a beautiful action - but I don't see a recoil lug. Is it like the Rem. 710 where the recoil lug is sandwiched between the barrel and receiver? It's a bit pricey at $980...but if a complete rifle using this action can be made for around $1500 it would be a good deal.

__________________
Guns Have Only Two Enemies-Rust and Politicians
"The United States Constitution (c) 1791 - All Rights Reserved"
If Guns Kill, Do Pencils Mis-spell Words?
Pain is Weakness Leaving the Body - USMC
"Qui desiderat pacem, praeparet bellum"
RL357Mag is offline  
 
Reply With Quote
Old 09-14-2008, 07:15 PM   #3
Feedback Score: 0 reviews
 
Join Date: Mar 2008
Location: I see you, and you will not know when I will strike
Posts: 24,301
Liked 3471 Times on 1606 Posts
Likes Given: 3590

Default

I think it's built into the front of the action itself. Instead of the recoil lug being separate, like on the standard Remy, I think they went with the one piece unit.

There is no question this isn't for anything other than complete custom build rifles. The guys who buy this action are looking to get all quality components and plan on spending $2K to $3K before optics...

This is in the same category as Surgeon and Lawton and those folks.

JD

__________________
Dillinger is offline  
 
Reply With Quote
Old 09-15-2008, 12:13 AM   #4
Feedback Score: 0 reviews
 
RL357Mag's Avatar
 
Join Date: Apr 2008
Location: Albany,New York
Posts: 3,252
Liked 4 Times on 4 Posts

Default

I wish I had the money to play that game! That's an impressive bolt design. I am looking at an article about the new SAKO A7 in .308. It has a notch under the receiver that engages a recoil lug embedded in the polymer stock. I was just wondering if the Badger receiver had the same set-up since the drawing doesn't show a recoil lug, but if that action is meant for a standard Remington wood stock, I don't think that would be possible. I guess it doesn't matter much anyway since I can't afford one!

__________________
Guns Have Only Two Enemies-Rust and Politicians
"The United States Constitution (c) 1791 - All Rights Reserved"
If Guns Kill, Do Pencils Mis-spell Words?
Pain is Weakness Leaving the Body - USMC
"Qui desiderat pacem, praeparet bellum"

Last edited by RL357Mag; 09-15-2008 at 12:20 AM.
RL357Mag is offline  
 
Reply With Quote
Old 09-15-2008, 03:00 AM   #5
Feedback Score: 0 reviews
 
bgeddes's Avatar
 
Join Date: Nov 2007
Posts: 441
Default

Where does this fall price wise versus a Hart Action or Rem 40X? Typical custom built rifle actions.

__________________
bgeddes is offline  
 
Reply With Quote
Old 09-15-2008, 02:09 PM   #6
Feedback Score: 0 reviews
 
Join Date: Mar 2008
Location: I see you, and you will not know when I will strike
Posts: 24,301
Liked 3471 Times on 1606 Posts
Likes Given: 3590

Default

Quote:
Originally Posted by bgeddes View Post
Where does this fall price wise versus a Hart Action or Rem 40X? Typical custom built rifle actions.
Can't really compare straight across with the Hart action. They send theirs out with a trigger that is "tuned" to your specs, give or take. Last time I priced out a Hart short action was a few months ago for a guy. I want to say it was about $1100 or $1150.

The Hart is a great action, much better than a Remy factory, but it is a round bottom action. This new one from Badger Ord is a flat bottom action, which personally I prefer hands down. And, as it will drop into any Remy factory stock, you have an advantage in glass bedding.

What that means to you as a shooter is that your 'smith can give you a much better glass bedding job on a flat bottom action. It's much more stable and a more solid base. There is nothing wrong with a round bottom, the flat bottoms are just much easier to get that bolted down solid mate between action and rifle.

The Badger Ord doesn't come with a trigger, but it does come with a 20MOA rail built into the unit, which is a great benefit. The Hart you have to add the rail aftermarket, then we always drill and tap the screw holes to one size larger for security on that fancy new glass you are putting on there.

The Hart comes with the SAKO style extractor and the Badger Ord comes with the M16 style. Both are much better than the Remy factory, so that is a wash.

I would say they are probably neck and neck depending on what you like. Not having handled the Badger Ord ( yet ) I am inclined to say either way personally.

As for the 40X - Well, that was a band aid attempt by Remington to address some issues. This is still a factory action. No factory action is going to match what a custom rifle action can do when assembled with equal components.

Can a factory action be made to shoot as well as a custom action? Absolutely.

Are you going to spend money reworking the factory action to get that performance? Yes. Yes, you are.

There is nothing wrong with the 40X - well nothing that wouldn't seem like me bashing my favorite Big Green action again for cpttango30's chagrin ( ) and it will perform fine for your average shooter.

That said, you can't compare factory actions with those turned out in the aftermarket unless you factor in what would it would take to get them up to the same level playing field.

JD
__________________
Dillinger is offline  
 
Reply With Quote
Old 09-15-2008, 11:37 PM   #7
Feedback Score: 0 reviews
 
Join Date: Oct 2007
Location: Stafford, Virginia,The state of insanity.
Posts: 14,043
Liked 32 Times on 27 Posts

Default

Few things I don't like about it. It is steel (You don't want that for a comp action). the rail is not integral with the action which stiffens the action and makes for a more stable scope mounting, it is bolted on with only 4 bolts not good enough. Didn't like the overall look of it either, to bulky looking, May look different in real life. short-action only and should offer in right bolt right port or right bolt left port left bolt right port or duel port styles.

Things I do like. Accepts Rem 700 parts 60* bolt throw 6 recoil lugs flat bottom receiver much easier to bed in the action. I also believe you get a better fit from a precision flat bottom receiver. Or if you are using a floating receive it makes doing that easier as well.

I think this would look right at home in a McMillan A-5 stock in camo and the action and barrel coated in flat black duracoat. Do I think it will last of course it will Badger Ord is a good company with a rep that is as solid as their mounts and rings. Do we need it no their are other actions that are just as good or better like the Surgon action, Stole, Nesika, ect..... It fills a niche market of the super duper ultra tactical crowd that need all the stuff for defending the mall from invading marauding Islamic Extremist.

Many of your custom actions don't come with triggers and such. If they do then they are tuned to your exact specs. Meaning you need to tell them creep over travel oz you want it set at and if you want a safety or not 99% of your high end comp action have no safety none.

Me personally when I build my rifle I am going to build two and send one to my dad all decked out and ready to go. I am going with a stole or nesika bay action Kreiger barrel twist depends on caliber and a laminated stock from West Custom Rifle Stocks. It will get either the Model 2000, Model 8 or The UnderTaker Rifle Stock They will both be topped off with Nightforce NSX 12-42x56mm scope And Richards Custom Rifles will build them or another shop out in the Pac Northwest. Not sure on the caliber yet. May do them in 6mmbr or 6ppc or even a 284 win both with min no turn necks.

__________________

Last edited by cpttango30; 09-15-2008 at 11:55 PM.
cpttango30 is offline  
 
Reply With Quote
Old 09-15-2008, 11:50 PM   #8
Feedback Score: 0 reviews
 
Join Date: Mar 2008
Location: I see you, and you will not know when I will strike
Posts: 24,301
Liked 3471 Times on 1606 Posts
Likes Given: 3590

Default

cpt - I concede your points. However,

Please Note:

The action is available in a short action now and long + magnum actions after November.

Also, the rail being held on with 4 screws is 2 more than most factory actions.

I agree, integral rail would be better. However most custom actions don't come with a rail, so anything over the action, for the price, is a plus.

All in all I think the action is a plus for the market place, but it's not necessary for your average shooter.

I do like it though and if it goes wide production and the price comes down, I would consider buying one for a future build.

JD

__________________
Dillinger is offline  
 
Reply With Quote
Old 09-16-2008, 01:04 AM   #9
Feedback Score: 0 reviews
 
Join Date: Oct 2007
Location: Stafford, Virginia,The state of insanity.
Posts: 14,043
Liked 32 Times on 27 Posts

Default

Quote:
Originally Posted by Dillinger View Post
cpt - I concede your points. However,

Please Note:

The action is available in a short action now and long + magnum actions after November.

Also, the rail being held on with 4 screws is 2 more than most factory actions.

I agree, integral rail would be better. However most custom actions don't come with a rail, so anything over the action, for the price, is a plus.

All in all I think the action is a plus for the market place, but it's not necessary for your average shooter.

I do like it though and if it goes wide production and the price comes down, I would consider buying one for a future build.

JD
Agreed for us it would be good for others it would not. LOL....
__________________
cpttango30 is offline  
 
Reply With Quote
Old 09-16-2008, 01:21 AM   #10
Feedback Score: 0 reviews
 
Join Date: Mar 2008
Location: I see you, and you will not know when I will strike
Posts: 24,301
Liked 3471 Times on 1606 Posts
Likes Given: 3590

Default

^ LOL - Agreed cpt. I'll see if Badger Ord will do a 2 for 1 deal for us...

JD

__________________
Dillinger is offline  
 
Reply With Quote
Reply

Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Firearms Forum Replies Last Post
This is AWESOME!!! Dillinger The Club House 21 05-05-2009 01:58 AM
this is awesome sgtdeath66 The Club House 5 03-21-2009 02:15 AM
Watchmen was awesome!!!! sgtdeath66 The Club House 4 03-09-2009 04:55 AM
Awesome GMC dragunovsks The Club House 7 08-28-2008 11:19 PM
Spring-Action or Pump-Action Grandy General Shotgun Discussion 3 03-13-2008 01:55 AM