Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   General Rifle Discussion (http://www.firearmstalk.com/forums/f18/)
-   -   .260 remington build (http://www.firearmstalk.com/forums/f18/260-remington-build-86175/)

7mmstw 03-10-2013 01:41 AM

.260 remington build
 
Hello all, I'm considering a .260 Remington build on a savage stainless target action I have. I've read a lot about 6.5 bores and was wondering if anyone had any input. My plan is a Brux or Shilen select match 1-8 twist 28"heavy stainless bull barrel, devcon bedded action, leave the accutrigger for now. Any thought on loads or setups is welcomed. Thanks

Axxe55 03-10-2013 03:33 AM

Quote:

Originally Posted by 7mmstw (Post 1170332)
Hello all, I'm considering a .260 Remington build on a savage stainless target action I have. I've read a lot about 6.5 bores and was wondering if anyone had any input. My plan is a Brux or Shilen select match 1-8 twist 28"heavy stainless bull barrel, devcon bedded action, leave the accutrigger for now. Any thought on loads or setups is welcomed. Thanks

i am not truly as familiar with the 260 Remington as i'd like to be, but it sounds like a good start to a nice rifle.

mainly jumping in here to learn more and to subscribe to the thread. sounds very interesting.

Txhillbilly 03-11-2013 01:38 AM

I've got an AR-10 in 260 Remington,and recently built a 6.5 Creedmoor bolt action. I prefer the 6.5 Creedmoor over the 260 Rem.

The ballistics are almost identical,but the Creedmoor's case is shorter,and allows the bullets to be seated really long and still fit in a magazine.
Brass for either caliber is a toss up,I have always hated Remington brass,it doesn't last very many loads before the necks split. But I resize Winchester 243 brass for all of my 260 Remington brass.
6.5 Creedmoor brass from Hornady has had a few problems,and if you load hot loads,the primer pockets get big/loose pretty quick-2/3 firings. Some guy's have been resizing 250 Savage/22-250 brass for the Creedmoor,but I haven't tried these yet.
Lapua makes brass for both calibers,but it's kinda pricey!

The 260 Rem. is a great caliber,but the 6.5 Creedmoor give's you a few things that the 260 doesn't,with almost identical ballistics.

7mmstw 03-11-2013 01:53 AM

I'd thought about the 6.5 creedmore, I've got a few thousand 22-250 cases. It's going in a bolt action and I don't care about magazines. Target/prairie dog gun. I plan on seating vlds out .015 off the lands.

Txhillbilly 03-11-2013 02:19 AM

Quote:

Originally Posted by 7mmstw (Post 1171566)
I'd thought about the 6.5 creedmore, I've got a few thousand 22-250 cases. It's going in a bolt action and I don't care about magazines. Target/prairie dog gun. I plan on seating vlds out .015 off the lands.

I'm shooting the 140gr VLD at .010 off the lands - 2.877" oal and still have a good .125-.150" left in my magwell.
My 6.5 is also a bolt action,built off a Savage Varmint action,and a 26" E.R. Shaw varmint contour barrel.
I got one hell of a deal on the Shaw barrel on a group buy,or else I'd buy a Hart or Kreiger barrel,but for $158,it was hard to pass up the Shaw.
It shoots pretty good too,smallest group so far with test loads is .122" center -center.
http://i999.photobucket.com/albums/a...psf364f8a4.jpg

http://i999.photobucket.com/albums/a...edmoor/024.jpg


All times are GMT. The time now is 05:26 AM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.