Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   Heckler & Koch Forum (http://www.firearmstalk.com/forums/f176/)
-   -   Extended mag release HK USP 40. (http://www.firearmstalk.com/forums/f176/extended-mag-release-hk-usp-40-a-100579/)

BigBizz87 11-20-2013 07:54 PM

Extended mag release HK USP 40.
 
Anyone else have any troubles with it every once in a while on a range trip it will drop the mag on every round I fire thru the gun

It ran flawlessly before swapping the release and even after for a little while problem just started a few months back, like I said its not every range trip I make just every so often, not sure what's up.

mdwalkerjr 11-21-2013 07:04 PM

No problems on my USP .45

2manyhobbies 11-22-2013 04:11 PM

HK mags or after market?

BigBizz87 11-22-2013 04:39 PM

Quote:

Originally Posted by 2manyhobbies (Post 1437996)
HK mags or after market?

All HK Factory mags

jjones45 11-22-2013 07:44 PM

[QUOTE="BigBizz87"] It ran flawlessly before swapping the release
You answered your own question. That's the problem

BigBizz87 11-22-2013 08:14 PM

It ran fine after aswell for over a year just recently started giving me problems.

2manyhobbies 11-27-2013 03:30 PM

crud in the works... try giving it an ultrasonic bath....

mdwalkerjr 11-27-2013 08:09 PM

Could also be the metal tab got bent or the spring needs to be replaced

304inc 12-20-2013 01:54 PM

I know this threads a couple of months old but wondering if you got it figured out. And why swap in the first place, the factory ambidextrous mag release on my usp 40 works great either hand even with gloves on. Seems if it were extended more it may just get in the way or snag easier. Do you have a picture of the extended release?

BigBizz87 12-20-2013 02:28 PM

Quote:

Originally Posted by 304inc (Post 1463171)
I know this threads a couple of months old but wondering if you got it figured out. And why swap in the first place, the factory ambidextrous mag release on my usp 40 works great either hand even with gloves on. Seems if it were extended more it may just get in the way or snag easier. Do you have a picture of the extended release?

Yes I adjusted the angle of the Metal tab works great now swapped it because the standard is small and harder to manipulate u can see the extended release on HKparts.net that's where I bought it it has great reviews everywhere I've read about them.


All times are GMT. The time now is 05:17 PM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.