I'm gauging interest for a bore flushing system for firearms that fire corrosive ammunition. I'm currently capable to make .303 British, 7.62x54r, and 8mm Mauser, but I can get other calibers upon request. Some may have heard of the concept before, I take a spent casing, a foot long section of polyurethane tubing (it's resistant to cleaning chemicals and the like), and a fixture of some sorts. For the fixtures I can do a plastic water bottle cap so you can take it to the range or elsewhere, or a brass hose adapter so you can hook it up to a hose or a water faucet so you can use hot water. It can be used to flush corrosive salts, grease/cosmoline, debris, and the like from your rifles' bore. The hot water will neutralize and flush corrosive salts, and wash away gunk and grease. I am in the "prototype" stage now, the only problem I'm facing is find a good sealant. I have tested it and it works like a charm, the epoxy I used became too brittle for repeated use, but it cleaned the debris that solvents and brushes couldn't clean from my M44's bore. As soon as I find an epoxy that works I can begin to market them to my fellow FTF members.
If all goes to plan and if there's interest, then I will begin to sell them. I will give around 1/4 of the price of each system sold to FTF to help with the needs of the website. I still need to talk to an admin to work this out. I have all the materials I need with the exception of the brass hose fittings. If there are any questions with the concept, caliber choice, design, or anything else, please feel free to email me. Thank you all, zaitsev.
Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery. - Sir Winston Churchill
Americans love to fight. All real Americans love the sting of battle. - General George S. Patton Sr.