Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   M&P Forum (http://www.firearmstalk.com/forums/f166/)
-   -   what's up with this? (http://www.firearmstalk.com/forums/f166/whats-up-81732/)

mountainman13 01-18-2013 05:00 PM

what's up with this?
 
3 Attachment(s)
..........

FullautoUSA 01-18-2013 10:08 PM

Did it come from the factory with the messed up pin?

mountainman13 01-18-2013 10:47 PM

They all came with notches. Never noticed that before.

c3shooter 01-18-2013 10:53 PM

Slices, dices, Makes MOUNDS of cole slaw!

But wait! There's more! If you order in the next 20 minutes....:p

FullautoUSA 01-19-2013 12:01 AM

Quote:

Originally Posted by mountainman13
They all came with notches. Never noticed that before.

Didn't see those, send it back to Smith & Wesson, maybe they'll send a new one.

psymmonds 01-19-2013 01:30 AM

Looks like where the safety goes

FullautoUSA 01-19-2013 01:39 AM

Quote:

Originally Posted by psymmonds
Looks like where the safety goes

I think your roght

hardluk1 01-27-2013 03:30 PM

The left side view shows the recess for a saftey but the right side view has some thing sticking out??!!?? Something messed up sticking out. Used handgun?

Sentry18 02-15-2013 05:27 PM

Most (but not all) of the M&P's are cut for the ambi-safety levers. You can buy plugs to fill the holes on those models. I have one M&P with the plugs and it runs just fine. The plugs are not going to move or fall out without some serious assistance.

WarFrog 06-25-2013 02:31 PM

Those frames were made for ones that have safety levers. I've never seen one from the factory like that though. I took my safety off and bought these filler blocks aftermarket to close the holes. Not quite sure why the factory would do this.


All times are GMT. The time now is 10:37 PM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.