Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   Revolver Handguns (http://www.firearmstalk.com/forums/f16/)
-   -   Top-Break Revolvers (http://www.firearmstalk.com/forums/f16/top-break-revolvers-2306/)

T3-M4 10-15-2007 04:40 PM

Top-Break Revolvers
 
Are there alot of top-break revolvers out there, are they still made?

stalkingbear 10-16-2007 01:50 PM

Top break revolvers
 
There used to be high standard revolvers mostly in .22 caliber,old iver johnsons,as well as s&w small to scofield revolvers. Today,there is only (to my knowledge) reproductions of scofield for cowboy action shooting by companys such as uberti among others. The uberti guns I've examined and shot have been very well made.

PRM 10-26-2007 03:21 PM

Top Breaks
 
Still seeing them regularly - however the original S&Ws are going over the top in price. You can expext to pay anywhere from about $1500 for a beater, to $5000-$6000 for one in pristine condition. These are the big bore single actions. The smaller calibre .32 and .38 S&Ws are more reasonable ($500-$1000) in execellent condition depending on the model. www.oldwestgunsmith.com is a good sight to check.

Uberti is making top breaks for the SASS crowd and those who just like an old west classic. However when they were designed this go-round, to accomadate longer cartridges, they took the gas ring off of the cylinder. This makes them a smokeless powder cartridge gun only. The black powder fouling will bind them up after a few shots. Uberti is making them for several vendors such as Navy Arms... The Ubertis are going between $750-$850. Beretta has also bought Uberti and is putting out a top break under their name that is a little higher in cost.


S&W re-issued the Schofield in 2000 (limited edition), and they are all over the internet for around $2000. They are chambered for the .45 Schofield only which can make shooting a little pricy for the average person.


All times are GMT. The time now is 09:42 AM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.