Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   Revolver Handguns (http://www.firearmstalk.com/forums/f16/)
-   -   Smith 460 mag Cleaning (http://www.firearmstalk.com/forums/f16/smith-460-mag-cleaning-15408/)

fishyseal 07-04-2009 03:58 PM

Smith 460 mag Cleaning
 
Just bought the Smith 460V and it is my first revolver. I had questions about cleaning the gun, most of the cleaning kits I am looking at buying don't list the 460. What is everyone else doing, any suggestions?

If there is anything additionally I should be thinking of please let me knw.

c3shooter 07-04-2009 06:50 PM

Despite the name, I think the bullet diameter is about the same as a 45 Colt- about .452 Try a 45 bore brush, and see how it fits. Pistol brushes are usually shorter than rifle brushes, since revolvers have to be cleaned from the muzzle, and the opening for the cylinder is not long enough to push a rifle brush completely OUT of the bore- reversing a brush while still in the bore ruins one quickly.

Jacketed bullets will likely not require a lot of hard cleaning- little powder solvent, wipe down, don't forget UNDER the extractor. LEAD bullets may start leading bore, requiring more energetic cleaning with a brush.

Clean cylinder from breech end, couple of passes with solvent soaked brush, let set a few minutes, dry patches. Use q tips to get space between cylinder and crane.

BILLYBOB44 07-04-2009 11:50 PM

You go Large fishy!!
 
First revolver=460=Wow, that's a big'un to start with!! As stated before, wet patch-brush-dry patch-light lube patch. Have fun with that HOSS:D


All times are GMT. The time now is 11:08 PM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.