Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   Revolver Handguns (http://www.firearmstalk.com/forums/f16/)
-   -   S&W model 65 (http://www.firearmstalk.com/forums/f16/s-w-model-65-a-2354/)

Johnny 10-17-2007 04:09 PM

S&W model 65
 
Would it be advantageous to cut the barrel of a S&W model 65 to 3.5"?

What effect would this have on the firing of the weapon?

tekarra 10-18-2007 12:34 AM

By the time you cut the barrel and re-set the front sight it could be expensive. Unless you have your heart set on 3.5" barrel, I would say to shop shop around for a 65 with a 3" barrel. It may be cheaper.

I have 4" and 3" 65s and they shoot differently.

robocop10mm 11-28-2007 06:22 PM

M-65
 
The 4" M-65 has a square butt. The 3" has a round butt. I have a 3"m-65 and I love the way it carries and shoots. If you want a shorter barrel you would likely be better off getting a 3" barrel and having it installed. Better yet get a new 3" gun so you can have one of each. Oops, that is the hoarder in my head speaking.

Gunnutz13 11-28-2007 07:08 PM

My 2 cents...
 
1 Attachment(s)
or...buy a used S&W Model 13 with a 3" inch bull barrel like I did....;)

Nickel plating was done by the original owner...cylinder crane is marked 13-2

furioso 11-01-2009 02:20 AM

+1 on the used 3" round butt model 13. it took a little while to find one but it's worth the search.

Dillinger 11-01-2009 02:26 AM

11-28-2007? Really Bro?

IN the WHOLE site?

THIS was the thread you found that interested you??

:cool:

Bighead 11-08-2009 06:41 PM

http://www.lva.virginia.gov/public/a...er_1_large.jpg

WDB 11-09-2009 03:11 AM

Digging deep to say something:confused:

How about those brass Knuckles....can I cut them down use on three fingers (need to keep the middle fingure loose to guesture)?


All times are GMT. The time now is 06:50 AM.

Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.