Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   Semi-Auto Handguns (http://www.firearmstalk.com/forums/f15/)
-   -   Ruger 22/45 Lite Problem (http://www.firearmstalk.com/forums/f15/ruger-22-45-lite-problem-85822/)

jags09dr 03-05-2013 03:56 PM

Ruger 22/45 Lite Problem
 
I have a brand new 22/45 lite. Havent even fired it yet. I bought a magazine disconnect bushing to put in it before i start shooting it. I proceeded to install it when i got to the point where i partially remove the hammer pivot pin. The problem is it wont budge at all. I hammered away on it with a brass punch and hammer and it just wont budge. I would really appreciate some help. any suggestions?? I had someone tell me it was a bent pin and i need to buy a new one but i still dont know how to go about removing the old one.

JonM 03-05-2013 04:00 PM

the sear return spring falls into a notch on the pin in question. you need to use a small punch to press the arm of the spring down then you can drift the pin.


All times are GMT. The time now is 08:41 AM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.