Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   Semi-Auto Handguns (http://www.firearmstalk.com/forums/f15/)
-   -   pap m92 (http://www.firearmstalk.com/forums/f15/pap-m92-83954/)

theenaut 02-11-2013 02:46 PM

pap m92
 
Is there anyway to put a milled receiver on the pap m92?

XsV 02-12-2013 02:07 AM

You referring to that AK lookin' rifle pistol thing? lol

theenaut 02-12-2013 07:52 PM

Quote:

Originally Posted by XsV (Post 1134088)
You referring to that AK lookin' rifle pistol thing? lol

Yes I am I'm need needing help with it

JonM 02-13-2013 12:25 AM

why do you want a milled reciever?? the reciever isnt the weak point in the ak47 and its kin's design. the problem point is the rear trunion and front trunion. the rear ones like to break under heavy use as do less commonly the front.

the reciever itself doesnt matter if its stamped or milled. milled ak tend to have problems since they cant be bent to fit minor discrepencies in part dimensions. thats why you dont see many of them that work well.

theenaut 02-13-2013 02:50 PM

Quote:

Originally Posted by JonM (Post 1135087)
why do you want a milled reciever?? the reciever isnt the weak point in the ak47 and its kin's design. the problem point is the rear trunion and front trunion. the rear ones like to break under heavy use as do less commonly the front.

the reciever itself doesnt matter if its stamped or milled. milled ak tend to have problems since they cant be bent to fit minor discrepencies in part dimensions. thats why you dont see many of them that work well.

Then is the pap m92 a good one

Breg0352 02-13-2013 07:57 PM

1 Attachment(s)
They are pretty solid good reciever, heavy barrels ... Only thing I dislike is the placement of the serial number aside from that their craftmanship surpasses the Draco's, IMO

Attachment 85304

JonM 02-13-2013 10:34 PM

Quote:

Originally Posted by theenaut (Post 1135791)
Then is the pap m92 a good one

as good as any ak47 can be.

it will cost you more to buy and swap out to a milled reciever than it will to buy a whole new gun if yours breaks. either you pay someone to do the labour or buy a barrrel press tool and the several ton press to diy it. thats not counting the new pins and rivet build kit your going to need. its not cheap to alter after the fact if your starting from zero tools.

personally i dont like the super short rifle barrels using a rifle round in a pistol format. you bring the bullet down to power levels less than if you had of just found something chambered in a pistol cartridge.

they are fun to shoot but terrible choice for defensive reasons.


All times are GMT. The time now is 02:19 AM.

Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.