Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   Semi-Auto Handguns (http://www.firearmstalk.com/forums/f15/)
-   -   new M&P 9 :frustration (http://www.firearmstalk.com/forums/f15/new-m-p-9-frustration-49976/)

headhunter 10-17-2011 03:27 AM

new M&P 9 :frustration
 
A short while ago I purchased a new M&P 9. I quickly became frustrated! It seemed to shoot reasonably well, however, at twenty yards it was 6 inches low. OK, no biggie, I could always take a little off the top of the front sight. What was more serious was the failures to feed. I stripped it down and cleaned and cleaned. I thought -it's new and needs to have a reasonable chance after some rounds are run through it.
Last weekend it reached the point of , I'm either going to fix it or Monday it is going back to Smith. I used a punch to dive out the rolled pin that retains the extractor. Underneath was rust, the coil spring was rusted to the point where it appeared to be almost solid. Spraying it with CLP and using a stainless "toothbrush" appears to have taken care of that. The top and bottom of the extractor had shiny places were it was making uneven contact with the slide. A little judicious honing took care of that.
The handgun had never been in the rain or gone "swimming". Apparently wiping the surface with an oily rag didn't get oil where it was needed and Smith doesn't include removal of the extractor as routine maintenance. Reading the manual, it's sort of frowned upon.

WDbeej 10-17-2011 03:34 AM

Wow, had my M&P9 for over 6 months now. Have not had a FTF with over 1000 rounds through the barrel.

USMC_Richey 10-17-2011 06:06 AM

Quote:

Originally Posted by headhunter (Post 603218)
A short while ago I purchased a new M&P 9. I quickly became frustrated! It seemed to shoot reasonably well, however, at twenty yards it was 6 inches low. OK, no biggie, I could always take a little off the top of the front sight. What was more serious was the failures to feed. I stripped it down and cleaned and cleaned. I thought -it's new and needs to have a reasonable chance after some rounds are run through it.
Last weekend it reached the point of , I'm either going to fix it or Monday it is going back to Smith. I used a punch to dive out the rolled pin that retains the extractor. Underneath was rust, the coil spring was rusted to the point where it appeared to be almost solid. Spraying it with CLP and using a stainless "toothbrush" appears to have taken care of that. The top and bottom of the extractor had shiny places were it was making uneven contact with the slide. A little judicious honing took care of that.
The handgun had never been in the rain or gone "swimming". Apparently wiping the surface with an oily rag didn't get oil where it was needed and Smith doesn't include removal of the extractor as routine maintenance. Reading the manual, it's sort of frowned upon.

Sounds like your ready to upgrade to a real Smith.. ;)

headhunter 10-17-2011 02:06 PM

Hey, California Marine, very funny! I may own several "clunkers" that I really love, but I had to try one of them new plastic wonders-just to see what all the fuss was about. I purchased my first "real Smith" in 1970 and some how it became an , dare I use the word, an addiction(?). Always glad to receive advice especially from America's finest. Thanks and have a great day.

robocop10mm 10-17-2011 03:07 PM

It is possible a dealer or wholesaler kept the gun is substandard atmospheric conditions. Go to the S&W web site.

Shipping/Returns - Smith & Wesson

Go to this page for shipping and return instructions.

trip286 10-17-2011 05:36 PM

I'd have to agree with robocop there. My mom and stepdad both have M&P .40's, bought new, and neither one of them has had a single malfunction of any type, they are now about 3 years old or so.

I also sort of agree with Richey, Sounds like your ready to upgrade to a real Smith.. I prefer revolvers myself. Nothing against the semi's and hoping to get a 1911 pretty soon, but man I like me some revolvers.

TacticalPrecision 10-18-2011 03:24 PM

Yeah, I've had zero malfunctions with mine even shooting hollowpoint ammo has never bothered them. I'd say if you're an original owner you should have plenty of warranty and should send it off to them, contact customer support and they will send you a shipping label for FedEx. There is probably something wrong with yours specifically seeing as I know tons of people that have them and have never had issues aswell as the people who have already posted on this thread.

Even if you think you may have fixed the problem yourself, it's important for them to know and take a look at things, Oxidation and removal of it can cause small changes to the tolerances of metal pieces. Not much, but a little.

MrWray 10-18-2011 04:58 PM

Unfortunately there are bad apples out there, not just in the m&p world.it really sucks that you happened to get one, i would definately send it back for repair. Hopefully this doesnt cloud your judgement about the m&p, they really are good weapons. Hope all goes well

WDB 10-18-2011 11:47 PM

Well that bites headhunter! I've owned several M&P's and CC a M&P 45 daily. I've never had any issues. The rust seems truly odd as it was my understanding that the internals are stainless steel. I would suggest sending it back and get a good one, I expect you will be pleased with the pistol.


All times are GMT. The time now is 03:40 PM.

Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.