Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   Semi-Auto Handguns (http://www.firearmstalk.com/forums/f15/)
-   -   CZ Polycoat Finish? (http://www.firearmstalk.com/forums/f15/cz-polycoat-finish-633/)

GrannySmithy 05-25-2007 04:30 PM

CZ Polycoat Finish?
 
I like both CZ's I've shot (75 Compacts), but was wondering about the polycoat finish.

What is a polycoat finish?

How durable (scratch, wear, rust resistant) is it?

westernamerican 06-15-2007 03:20 PM

Do all of these finishes and coats make the gun shoot better? :D

Cliff47 07-03-2007 02:05 PM

The CZ polycoat doesn't make or allow the pistol to shoot better, but it wears like iron (pardon the pun), and can be touched up with some auto-shop spray paint. It's just another way of protecting the steel under the coating.

Bidah 07-10-2007 11:56 PM

I am not sure what it is, but I can tell you that it wears pretty darn well. I have abused mine for years and it still looks darn good. To me it looks as good as the day I got it, but I am sure that it probably isn't quite that good.. :)

Cliff47 07-12-2007 08:01 PM

I would venture that the coating is a polymer/epoxy mix. I have a couple of Pre-B models that have the same coating, those look almost new with some very slight holster wear. I suspect the pistols were carried a lot and shot just a little.

seedy 02-09-2008 01:48 AM

I noticed that the dan wesson 445 alaskan has what looks like the same finish. This is just a guess from looking at he picture and knowing the two companies merged. I have a cz 75B with the polycoat and am happy with the looks and durabilty.

Dgunsmith 02-09-2008 02:27 AM

Coatings:
 
Early CZ75's had a baked epoxy pain finish. The polycoats are a plastic based spray on...a little better than paint.

Something like Industrial TEFLON-S will enhance the firearm by ending rust and corrosion and being self lubricating. No Oil = nothing to trap and collect dust and airborne contamination like dust.

Take a look at www.bearcoat.com shy of hard-chrome, the toughest finish on the market.

Beat out caramic and poly coats in testing for the new FBI rifles from HS Precision. ALL the others failed the field testing for performance.

matt g 02-09-2008 02:48 AM

Quote:

Originally Posted by Dgunsmith (Post 15916)
Early CZ75's had a baked epoxy pain finish. The polycoats are a plastic based spray on...a little better than paint.

Something like Industrial TEFLON-S will enhance the firearm by ending rust and corrosion and being self lubricating. No Oil = nothing to trap and collect dust and airborne contamination like dust.

Take a look at www.bearcoat.com shy of hard-chrome, the toughest finish on the market.

Beat out caramic and poly coats in testing for the new FBI rifles from HS Precision. ALL the others failed the field testing for performance.

How is the lubricity of the Bear Coat?


All times are GMT. The time now is 08:50 AM.

Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.